Publications dans des revues avec comité de lecture
Publications déposées en 2015 – aujourd’hui
Towards delafossite structure of Cu–Cr–O thin films deposited by reactive magnetron sputtering: Influence of substrate temperature on optoelectronics properties
Sun, Hui; Arab Pour Yazdi, Mohammad; Briois, Pascal; Pierson, Jean-Francois; Sanchette, Frederic; Billard, Alain
Vacuum, 2015, Vol. 114, pp 101-107
Sliding Wear Behavior of Al2O3–TiO2 Coatings Fabricated by the Suspension Plasma Spraying Technique
Klyatskina, E.; Espinosa-Fernández, L.; Darut, G.; Segovia, F.; Salvador, M. D.; Montavon, G.; Agorges, H.
Tribology Letters, 2015, Vol. 59, N°1, pp 1-9
Feasibility of BITAVOX electrolyte-based dodecane potentiometric sensor cells
Dereeper, E.; Briois, P.; Billard, A.
Thin Solid Films, 2015, Vol. , N°, pp
Estimating the behavior of particles sprayed by a single-cathode plasma torch based on a nonlinear autoregressive exogenous model
Liu, T.; Deng, S.; Planche, M. -P.; Montavon, G.
Surface and Coatings Technology, 2015, Vol. 268, pp 284-292
Study of metallic powder behavior in Very Low Pressure Plasma Spraying (VLPPS) – Application to the manufacturing of titanium-aluminum coatings
Vautherin, B.; Planche, M. -P.; Montavon, G.; Lapostolle, F.; Quet, A.; Bianchi, L.
Surface and Coatings Technology, 2015, Vol. 275, pp 341-348
Ni-free superelastic binary Ti-Nb coatings obtained by DC magnetron co-sputtering
Achache, S.; Lamri, S.; Arab Pour Yazdi, M.; Billard, A.; François, M.; Sanchette, F.
Surface and Coatings Technology, 2015, Vol. 275, pp 283-288
Deposition features of cold sprayed copper particles on preheated substrate
Yin, Shuo; Suo, Xinkun; Guo, Zhiwei; Liao, Hanlin; Wang, Xiaofang
Surface and Coatings Technology, 2015, Vol. 268, pp 252-256
Strong effect of carrier gas species on particle velocity during cold spray processes
Suo, Xinkun; Yin, Shuo; Planche, Marie-Pierre; Liu, Taikai; Liao, Hanlin
Surface and Coatings Technology, 2015, Vol. 268, pp 90-93
Microstructure and wear resistance of FeAl/Al2O3 intermetallic composite coating prepared by atmospheric plasma spraying
Song, Bo; Dong, Shujuan; Liao, Hanlin; Coddet, Christian
Surface and Coatings Technology, 2015, Vol. 268, pp 24-29
Residual stresses and final deformation of an alumina coating: Modeling and measurement
Liu, Jiangwei; Bolot, Rodolphe; Costil, Sophie
Surface and Coatings Technology, 2015, Vol. 268, pp 241-246
Microstructure and properties of nanostructured YSZ coating prepared by suspension plasma spraying at low pressure
He, Pengjiang; Sun, Hui; Gui, Yunfang; Lapostolle, Frédéric; Liao, Hanlin; Coddet, Christian
Surface and Coatings Technology, 2015, Vol. 261, pp 318-326
A study on the microstructure and tribological behavior of cold-sprayed metal matrix composites reinforced by particulate quasicrystal
Guo, Xueping; Chen, Jingfeng; Yu, Hongliang; Liao, Hanlin; Coddet, Christian
Surface and Coatings Technology, 2015, Vol. , N°268, pp 94-98
Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrates using plasma spraying: From single splat to coating
Dong, Shujuan; Song, Bo; Liao, Hanlin; Coddet, Christian
Surface and Coatings Technology, 2015, Vol. 268, pp 46-51
Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: Microstructure and wear resistance
Dong, Shujuan; Song, Bo; Liao, Hanlin; Coddet, Christian
Surface and Coatings Technology, 2015, Vol. 268, pp 36-45
Steel coating application for engine block bores by Plasma Transferred Wire Arc spraying process
Darut, Geoffrey; Liao, Hanlin; Coddet, Christian.; Bordes, Jean Michel; Diaby, Moussa
Surface and Coatings Technology, 2015, Vol. 268, pp 115-122
Development of an improved method for identifying material stress–strain curve using repeated micro-impact testing
Al Baida, H.; Kermouche, G.; Langlade, C.
Mechanics of Materials, 2015, Vol. 86, pp 11-20
Effect of cold work, second phase precipitation and heat treatments on the mechanical properties of copper–silver alloys manufactured by cold spray
Coddet, Pierre; Verdy, Christophe; Coddet, Christian; Debray, François
Materials Science and Engineering: A, 2015, Vol. 637, pp 40-47
Microstructure and gas sensing properties of solution precursor plasma-sprayed zinc oxide coatings
Zhang, Chao; Geng, Xin; Li, Hua; He, Peng-Jiang; Planche, Marie-Pierre; Liao, Hanlin; Olivier, Marie-George; Debliquy, Marc
Materials Research Bulletin, 2015, Vol. 63, pp 67-71
Interfacial bonding features of Ni coating on Al substrate with different surface pretreatments in cold spray
Yin, Shuo; Xie, Yingchun; Suo, Xinkun; Liao, Hanlin; Wang, Xiaofang
Materials Letters, 2015, Vol. 138, pp 143-147
Structural, electrical and magnetic characterization of in-situ crystallized ZnO:Co thin films synthesized by reactive magnetron sputtering
Lardjane, Soumia; Pour Yazdi, Mohammad Arab; Martin, Nicolas; Bellouard, Christine; Fenineche, Nour-eddine; Schuler, Andreas; Merad, Ghouti; Billard, Alain
Materials Chemistry and Physics, 2015, Vol. 161, pp 26-34
Bi4V2O11 and BITAVOX.20 coatings deposited by reactive magnetron sputtering
Dereeper, E.; Briois, P.; Vannier, R. -N.; Billard, A.
Materials Chemistry and Physics, 2015, Vol. 153, pp 9-16
Investigation on the Clogging Behavior and Additional Wall Cooling for the Axial-Injection Cold Spray Nozzle
Wang, Xudong; Zhang, Bo; Lv, Jinsheng; Yin, Shuo
Journal of Thermal Spray Technology, 2015, Vol. 24, N°4, pp 696-701
Effect of high-temperature preheating on the selective laser melting of yttria-stabilized zirconia ceramic
Liu, Qi; Danlos, Yoann; Song, Bo; Zhang, Baicheng; Yin, Shuo; Liao, Hanlin
Journal of Materials Processing Technology, 2015, Vol. 222, pp 61-74
Zr–Cu thin film metallic glasses: An assessment of the thermal stability and phases’ transformation mechanisms
Apreutesei, M.; Steyer, P.; Billard, A.; Joly-Pottuz, L.; Esnouf, C.
Journal of Alloys and Compounds, 2015, Vol. 619, pp 284-292
Three-dimensional simulation of an argon–hydrogen DC non-transferred arc plasma torch
Guo, Zhiwei; Yin, Shuo; Liao, Hanlin; Gu, Sai
International Journal of Heat and Mass Transfer, 2015, Vol. 80, pp 644-652
Effect of the deviation of the current density profile center on the three-dimensional non-transferred arc plasma torch
Guo, Zhiwei; Yin, Shuo; Qian, Zhongdong; Liao, Hanlin; Gu, Sai
Computers & Fluids, 2015, Vol. 114, pp 163-171
Binary Zr–Ni/Co metallic glass films: Role of the structural state on their durability
Apreutesei, M.; Boissy, C.; Mary, N.; Arab Pour Yazdi, M.; Billard, A.; Steyer, P.
Acta Materialia, 2015, Vol. 89, pp 305-314
Optimization of the injection with a twin-fluid atomizer for suspension plasma spray process using three non-intrusive diagnostic tools
Aubignat, E.; Planche, M. P.; Billieres, D.; Allimant, A.; Girardot, L.; Bailly, Y.; Montavon, G.
Journal of Visualization, 2015, Vol. , N°, pp
Microstructural, Hyperfine, and Magnetic Properties of FeSiBCuNb Deposits
Alleg, S.; Hamza, L.; Ibrir, M.; Souilah, S.; Tebib, W.; Fenineche, N. E.; Greneche, J. M.
Journal of Superconductivity and Novel Magnetism, 2015, Vol. 28, pp 2431-2439
Publications déposées en 2012 – 2014
Properties of TiSiN coatings deposited by hybrid HiPIMS and pulsed-DC magnetron co-sputtering
Yazdi, M. Arab Pour; Lomello, F.; Wang, J.; Sanchette, F.; Dong, Z.; White, T.; Wouters, Y.; Schuster, F.; Billard, A.
Vacuum, 2014, Vol. 109, pp 43-51
Microstructural, thermal and mechanical behavior of co-sputtered binary Zr-Cu thin film metallic glasses
Apreutesei, M.; Steyer, P.; Joly-Pottuz, L.; Billard, A.; Qiao, J.; Cardinal, S.; Sanchette, F.; Pelletier, J. M.; Esnouf, C.
Thin Solid Films, 2014, Vol. 561, pp 53-59
Effect of preheating on deformation in cold spraying dissimilar combinations
Yu, M.; Li, W.-Y.; Wang, F. F.; Liao, H. L.
Surface Engineering, 2014, Vol. 30, N°5, pp 329-334
Effect of matrix/reinforcement combination on cold sprayed coating deposition behaviour
Yu, M.; Li, W. Y.; Chen, H.; Suo, X. K.; Liao, H. L.
Surface Engineering, 2014, Vol. 30, N°11, pp 796-800
Significant influence of carrier gas temperature during the cold spray process
Yin, S.; Suo, X.; Liao, H.; Guo, Z.; Wang, X.
Surface Engineering, 2014, Vol. 30, N°6, pp 443-450
Euler based finite element analysis on high velocity impact behaviour in cold spraying
Yin, S.; Liao, H. L.; Wang, X. F.
Surface Engineering, 2014, Vol. 30, N°5, pp 309-315
Microstructure and corrosion behavior of cold sprayed SiCp/Al 5056 composite coatings
Wang, Yingying; Normand, Bernard; Mary, Nicolas; Yu, Min; Liao, Hanlin
Surface & Coatings Technology, 2014, Vol. 251, pp 264-275
Suppression effect of decarburization by dry-ice blasting on plasma-sprayed steel coatings: Structure, wear performance and magnetic properties
Song, Bo; Dong, Shujuan; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Surface & Coatings Technology, 2014, Vol. 253, pp 44-51
Temperature dependence of the residual stresses and mechanical properties in TiN/CrN nanolayered coatings processed by cathodic arc deposition
Lomello, F.; Yazdi, M. Arab Pour; Sanchette, F.; Schuster, F.; Tabarant, M.; Billard, A.
Surface & Coatings Technology, 2014, Vol. 238, pp 216-222
Synthesis and characterization of La2NiO4+delta coatings deposited by reactive magnetron sputtering using plasma emission monitoring
Fondard, J.; Billard, A.; Bertrand, G.; Briois, P.
Solid State Ionics, 2014, Vol. 265, pp 73-79
Rapid in situ fabrication of Fe/SiC bulk nanocomposites by selective laser melting directly from a mixed powder of microsized Fe and SiC
Song, Bo; Dong, Shujuan; Coddet, Christian
Scripta Materialia, 2014, Vol. 75, pp 90-93
Microstructure study on selective laser melting yttria stabilized zirconia ceramic with near IR fiber laser
Liu, Qi; Song, Bo; Liao, Hanlin
Rapid Prototyping Journal, 2014, Vol. 20, N°5, pp 346-354
Microstructure and tensile properties of iron parts fabricated by selective laser melting
Song, Bo; Dong, Shujuan; Deng, Sihao; Liao, Hanlin; Coddet, Christian
Journal of Thermal Spray Technology, 2014, Vol. 56, pp 451-460
Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior
Song, Bo; Dong, Shujuan; Liu, Qi; Liao, Hanlin; Coddet, Christian
Materials & Design, 2014, Vol. 54, pp 727-733
Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior
Song, Bo; Dong, Shujuan; Coddet, Pierre; Liao, Hanlin; Coddet, Christian
Materials & Design, 2014, Vol. 53, pp 1-7
Mechanical Properties of Cu-0.1Ag Alloys Deposited by Cold Spray with Various Powder Feed Rate and Heat Treatment
Coddet, Pierre; Verdy, Christophe; Coddet, Christian; Debray, François
Journal of Thermal Spray Technology, 2014, Vol. 24, pp 119-125
Building-Up Process of Cold-Sprayed Al5056/In718 Composite Coating
Yu, M.; Chen, H.; Li, W.-Y.; Suo, X. K.; Liao, H. L.
Journal of Thermal Spray Technology, 2014, Vol. 24, N°3, pp 579-586
Effects of Substrate Hardness and Spray Angle on the Deposition Behavior of Cold-Sprayed Ti Particles
Yin, Shuo; Suo, Xinkun; Su, Jiaqing; Guo, Zhiwei; Liao, Hanlin; Wang, Xiaofang
Journal of Thermal Spray Technology, 2014, Vol. 23, N°1, pp 76-83
Deposition Features of Ti Coating Using Irregular Powders in Cold Spray
Yin, Shuo; He, Pengjiang; Liao, Hanlin; Wang, Xiaofang
Journal of Thermal Spray Technology, 2014, Vol. 23, N°6, pp 984-990
Prediction of Critical Velocity During Cold Spraying Based on a Coupled Thermomechanical Eulerian Model
Wang, F. F.; Li, W. Y.; Yu, M.; Liao, H. L.
Journal of Thermal Spray Technology, 2014, Vol. 23, N°1, pp 60-67
Vapors and Droplets Mixture Deposition of Metallic Coatings by Very Low Pressure Plasma Spraying
Vautherin, B.; Planche, M.-P.; Bolot, R.; Quet, A.; Bianchi, L.; Montavon, G.
Journal of Thermal Spray Technology, 2014, Vol. 23, N°4, pp 596-608
Effects of SiC Volume Fraction and Particle Size on the Deposition Behavior and Mechanical Properties of Cold-Sprayed AZ91D/SiCp Composite Coatings
Suo, X. K.; Suo, Q. L.; Li, W. Y.; Planche, M. P.; Liao, H. L.
Journal of Thermal Spray Technology, 2014, Vol. 23, N°1, pp 91-97
Effect of Dry-Ice Blasting on Structure and Magnetic Properties of Plasma-Sprayed Fe-40Al Coating from Nanostructured Powders
Song, Bo; Dong, Shujuan; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Journal of Thermal Spray Technology, 2014, Vol. 23, N°1, pp 227-235
A Generalized Critical Velocity Window Based on Material Property for Cold Spraying by Eulerian Method
Li, W. Y.; Yu, M.; Wang, F. F.; Yin, S.; Liao, H. L.
Journal of Thermal Spray Technology, 2014, Vol. 23, N°3, pp 557-566
Kinematic Optimization of Robot Trajectories for Thermal Spray Coating Application
Deng, Sihao; Liang, Hong; Cai, Zhenhua; Liao, Hanlin; Montavon, Ghislain
Journal of Thermal Spray Technology, 2014, Vol. 23, N°8, pp 1382-1389
The Effect of Spray Distance and Scanning Step on the Coating Thickness Uniformity in Cold Spray Process
Cai, Zhenhua; Deng, Sihao; Liao, Hanlin; Zeng, Chunnian; Montavon, Ghislain
Journal of Thermal Spray Technology, 2014, Vol. 23, N°3, pp 354-362
A Coupled Model Between Robot Trajectories and Thermal History of the Workpiece During Thermal Spray Operation
Bolot, Rodolphe; Deng, Sihao; Cai, Zhenhua; Liao, Hanlin; Montavon, Ghislain
Journal of Thermal Spray Technology, 2014, Vol. 23, N°3, pp 296-303
Metal Matrix Composite Coatings Manufactured by Thermal Spraying: Influence of the Powder Preparation on the Coating Properties
Aussavy, D.; Costil, S.; El Kedim, O.; Montavon, G.; Bonnot, A.-F.
Journal of Thermal Spray Technology, 2014, Vol. 23, N°1, pp 190-196
Kinetic and thermodynamic studies of hydrogen storage alloys as negative electrode materials for Ni/MH batteries: a review
Tliha, M.; Khaldi, C.; Boussami, S.; Fenineche, N.; El-Kedim, O.; Mathlouthi, H.; Lamloumi, J.
Journal of Solid State Electrochemistry, 2014, Vol. 18, N°3, pp 577-593
Ab initio calculations of structural, electronic, optical and thermodynamic properties of alkaline earth tellurides BaxSr1-xTe
Bahloul, B.; Bentabet, A.; Amirouche, L.; Bouhadda, Y.; Bounab, S.; Deghfel, B.; Fenineche, N.
Journal of Physics and Chemistry of Solids, 2014, Vol. 75, N°3, pp 307-314
Relationships between in-flight particle characteristics and properties of HVOF sprayed WC-CoCr coatings
Guo, Xueping; Planche, Marie-Pierre; Chen, Jingfeng; Liao, Hanlin
Journal of Materials Processing Technology, 2014, Vol. 214, N°2, pp 456-461
Fabrication of FeSiB magnetic coatings with improved saturation magnetization by plasma spray and dry-ice blasting
Dong, Shujuan; Song, Bo; Zhang, Xiaofeng; Deng, Chunming; Fenineche, Nouredine; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Journal of Alloys and Compounds, 2014, Vol. 584, pp 254-260
Study of the dynamic’s indentation effect with controlled energy on the tribologically transformed surfaces: analysis of microhardness of copper using response surface methodology
Aouici, S.; Sahour, M. C.; Rouainia, M.; Coquillet, B.; Langlade, C.; Vannes, A. B.
International Journal of Advanced Manufacturing Technology, 2014, Vol. 77, N°42347, pp 1917-1925
Manufacturing of composite titanium-titanium nitride coatings by reactive very low pressure plasma spraying (R-VLPPS)
Vautherin, B.; Planche, M.-P.; Quet, A.; Bianchi, L.; Montavon, G.
High Temperature Materials and Processes, 2014, Vol. 550, pp 12035
Effect of injection pressure on particle acceleration, dispersion and deposition in cold spray
Yin, Shuo; Liu, Qi; Liao, Hanlin; Wang, Xiaofang
Computational Materials Science, 2014, Vol. 90, pp 42186
Solution precursor plasma-sprayed tungsten oxide coatings for nitrogen dioxide detection
Zhang, Chao; Geng, Xin; Olivier, Marjorie; Liao, Hanlin; Debliquy, Marc
Ceramics International, 2014, Vol. 40, N°7, pp 11427-11431
Microstructure, mechanical property and wear performance of cold sprayed A15056/SiCp composite coatings: Effect of reinforcement content
Yu, M.; Suo, X. K.; Li, W. Y.; Wang, Y. Y.; Liao, H. L.
Applied Surface Science, 2014, Vol. 289, pp 188-196
Surface modifications induced by pulsed-laser texturing-Influence of laser impact on the surface properties
Costil, S.; Lamraoui, A.; Langlade, C.; Heintz, O.; Oltra, R.
Applied Surface Science, 2014, Vol. 288, pp 542-549
Enhanced tunability of the composition in silicon oxynitride thin films by the reactive gas pulsing process
Aubry, Eric; Weber, Sylvain; Billard, Alain; Martin, Nicolas
Applied Surface Science, 2014, Vol. 290, pp 148-153
Dielectric properties of Al2O3 coatings deposited via atmospheric plasma spraying and dry-ice blasting correlated with microstructural characteristics
Dong, Shujuan; Song, Bo; Liao, Hanlin; Coddet, Christian
Applied Physics A, 2014, Vol. 118, N°1, pp 283-290
Modeling and numerical simulation of the resistance spot welding of zinc coated steel sheets using rounded tip electrode: Analysis of required conditions
Raoelison, R. N.; Fuentes, A.; Pouvreau, C.; Rogeon, Ph; Carre, P.; Dechalotte, F.
Applied Mathematical Modelling, 2014, Vol. 38, N°9, pp 2505-2521
Characterisations of TiC particle reinforced FeAl composite part fabricated by selective laser melting
Song, B.; Dong, S.; Liao, H.; Coddet, C.
Materials Research Innovations, 2014, Vol.18, N°1, pp 50-56
Study of stirred layers on 316L steel created by friction stir processing
Langlade, C.; Roman, A.; Schlegel, D.; Gete, E.; Folea, M.
IOP Conference Series: Materials Science and Engineering, 2014, Vol. 63, pp 12007
Synthesis and Characterization of Ag Doped LaCoO3 Nanowire Sputter-Deposited Coatings as Heavy Hydrocarbon Sensors
Taguett, Amine; Yazdi, Mohammad Arab Pour; Sanchez, Jean Baptiste; Monsifrot, Eric; Briois, Pascal; Berger, Franck; Billard, Alain
Key Engineering Materials, 2014, Vol. 605, pp 314-317
Modeling and Measurement of the Effective Young Modulus of Porous Biomedical Materials Manufactured via SLM
Joguet, David; Danlos, Yoann; Bolot, Rodolphe; Montavon, Ghislain; Coddet, Christian
Key Engineering Materials, 2014, Vol. 606, pp 125-128
Relationships between Microstructural and Mechanical Properties of Plasma Sprayed AlSi-Polyester Composite Coatings: Application to Abradable Materials
Duramou, Yann; Bolot, Rodolphe; Seichepine, Jean Louis; Danlos, Yoann; Bertrand, Pierre; Montavon, Ghislain; Selezneff, Serge
Key Engineering Materials, 2014, Vol. 606, pp 155-158
Thermomechanical Properties of CoNiCrAlY-BN-Polyester Composite Coatings Elaborated by Atmospheric Plasma Spraying
Aussavy, Delphine; Bolot, Rodolphe; Peyraut, François; Montavon, Ghislain; Selezneff, Serge
Key Engineering Materials, 2014, Vol. 606, pp 167-170
Magnetic pulse welding: Interface of Al/Cu joint and investigation of intermetallic formation effect on the weld features
Raoelison, R. N.; Racine, D.; Zhang, Z.; Buiron, N.; Marceau, D.; Rachik, M.
Journal of Manufacturing Processes, 2014, Vol. 16, N°4, pp 427-434
Effect of suspension characteristics on in-flight particle properties and coating microstructures achieved by suspension plasma spray
Aubignat, E.; Planche, M. P.; Allimant, A.; Billieres, D.; Girardot, L.; Bailly, Y.; Montavon, G.
High Temperature Materials and Processes, 2014, Vol. 550, pp 12019
Mechanisms of stainless steels erosion by water droplets
Luiset, B.; Sanchette, F.; Billard, A.; Schuster, D.
Wear, 2013, Vol. 303, N°1-2, pp 459-464
Selective laser melting commercially pure Ti under vacuum
Zhang, Baicheng; Liao, Hanlin; Coddet, Christian
Vacuum, 2013, Vol. 95, pp 25-29
Correlation between structural and optical properties of WO3 thin films sputter deposited by glancing angle deposition
Charles, Cedric; Martin, Nicolas; Devel, Michel; Ollitrault, Julien; Billard, Alain
Thin Solid Films, 2013, Vol. 534, pp 275-281
Effect of particle and substrate preheating on particle deformation behavior in cold spraying
Yu, M.; Li, W.-Y.; Wang, F. F.; Suo, X. K.; Liao, H. L.
Surface & Coatings Technology, 2013, Vol. 220, pp 174-178
Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiCp/Al 5056 composite coatings
Yu, M.; Li, W.-Y.; Suo, X. K.; Liao, H. L.
Surface & Coatings Technology, 2013, Vol. 220, pp 102-106
Numerical investigations on the effect of total pressure and nozzle divergent length on the flow character and particle impact velocity in cold spraying
Suo, X. K.; Liu, T. K.; Li, W. Y.; Suo, Q. L.; Planche, M. P.; Liao, H. L.
Surface & Coatings Technology, 2013, Vol. 232, pp 290-297
Synthesis and characterization on atomphospheric plasma sprayed amorphous silica doped hydrxoyapatite coatings (vol 206, pg 4659, 2012)
Xu, J. L.; Joguet, D.; Cizek, J.; Khor, K. A.; Liao, H. L.; Coddet, C.; Chen, W. N.
Surface & Coatings Technology, 2013, Vol. 221, pp 232
Numerical study on the effect of nozzle dimension on particle distribution in cold spraying
Suo, X. K.; Liu, T. K.; Li, W. Y.; Suo, Q. L.; Planche, M. P.; Liao, H. L.
Surface & Coatings Technology, 2013, Vol. 220, pp 107-111
Finite element modeling of the elastic modulus of thermal barrier coatings
Qiao, Jiang-Hao; Bolot, Rodolphe; Liao, Hanlin
Surface & Coatings Technology, 2013, Vol. 220, pp 170-173
Influence of bias voltage on properties of AlCrN coatings prepared by cathodic arc deposition
Lomello, F.; Sanchette, F.; Schuster, F.; Tabarant, M.; Billard, A.
Surface & Coatings Technology, 2013, Vol. 224, pp 77-81
Multi-layered thermal barrier coatings fabricated by plasma-spraying and dry-ice blasting: Microstructure characterization and prolonged lifetime
Dong, Shujuan; Song, Bo; Zhou, Genshu; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Surface & Coatings Technology, 2013, Vol. 236, pp 557-567
Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting
Dong, Shujuan; Song, Bo; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Surface & Coatings Technology, 2013, Vol. 225, pp 58-65
Improvement in the microstructure and property of plasma sprayed metallic, alloy and ceramic coatings by pre-/during-treatment of dry-ice blasting
Dong, Shujuan; Song, Bo; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Surface & Coatings Technology, 2013, Vol. 220, pp 199-203
Investigation of surface properties and mechanical and tribological behaviors of polyimide based composite coatings
Demian, Camelia; Liao, Hanlin; Lachat, Remy; Costil, Sophie
Surface & Coatings Technology, 2013, Vol. 235, pp 603-610
Efficiency of a dense thin CGO buffer layer for solid oxide fuel cell operating at intermediate temperature
Constantin, G.; Rossignol, C.; Briois, P.; Billard, A.; Dessemond, L.; Djurado, E.
Solid State Ionics, 2013, Vol. 249, pp 98-104
Plasma Spray Process Operating Parameters Optimization Based on Artificial Intelligence
Liu, T.; Planche, M. P.; Kanta, A. F.; Deng, S.; Montavon, G.; Deng, K.; Ren, Z. M.
Plasma Chemistry and Plasma Processing, 2013, Vol. 33, N° 5, pp 1025-1041
The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder
Zhang, Baicheng; Dembinski, Lucas; Coddet, Christian
Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, Vol. 584, pp 21-31
Damage phenomena of thin hard coatings submitted to repeated impacts: Influence of the substrate and film properties
Lamri, S.; Langlade, C.; Kermouche, G.
Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, Vol. 560, pp 296-305
Local identification of the stress-strain curves of metals at a high strain rate using repeated micro-impact testing
Kermouche, G.; Grange, F.; Langlade, C.
Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, Vol. 569, pp 71-77
Evaluation of the splats properties and relation with droplets diameters in atomization process using a De Laval Nozzle
Planche, Marie-Pierre; Khatim, Othmane; Dembinski, Lucas; Bailly, Yannick; Coddet, Christian
Materials Chemistry and Physics, 2013, Vol. 137, N° 3, pp 681-688
Investigation on mechanical property of annealed copper particles and cold sprayed copper coating by a micro-indentation testing
Li, Wenya; Huang, Chunjie; Yu, Min; Liao, Hanlin
Materials & Design, 2013, Vol. 46, pp 219-226
Impacting Behavior of Large Oxidized Copper Particles in Cold Spraying
Yu, Min; Li, Wenya; Guo, Xueping; Liao, Hanlin
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 2, pp 433-440
Effect of Spray Angle on Temperature Distribution within the Metallic Substrate in Cold Spraying
Yin, Shuo; Sun, Yan; Wang, Xiaofang; Guo, Zhiwei; Liao, Hanlin
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 6, pp 983-991
Oxidation Control of Atmospheric Plasma Sprayed FeAl Intermetallic Coatings Using Dry-Ice Blasting
Song, Bo; Dong, Shujuan; Coddet, Pierre; Hansz, Bernard; Grosdidier, Thierry; Liao, Hanlin; Coddet, Christian
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 2, pp 345-351
Knudsen Effect on the Estimation of the Effective Thermal Conductivity of Thermal Barrier Coatings
Qiao, J. H.; Bolot, R.; Liao, H. L.; Coddet, C.
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 2, pp 175-182
Colour Matching in Decorative Thermally Sprayed Glass Coatings
Poirier, Thierry; Bertrand, Pierre; Coddet, Christian
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 1, pp 48-56
Effect of Gun Current on Electrical Properties of Atmospheric Plasma-Sprayed Lanthanum Silicate Coatings
Gao, Wei; Liao, Han-Lin; Coddet, Christian
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 7, pp 1103-1108
Preparation of Aluminum Coatings by Atmospheric Plasma Spraying and Dry-Ice Blasting and Their Corrosion Behavior
Dong, Shu-Juan; Song, Bo; Zhou, Gen-Shu; Li, Chang-Jiu; Hansz, Bernard; Liao, Han-Lin; Coddet, Christian
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 7, pp 1222-1229
Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings
Dong, Shujuan; Song, Bo; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 2, pp 213-220
Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats
Dong, Shujuan; Song, Bo; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Journal of Thermal Spray Technology, 2013, Vol. 22, N° 1, pp 61-68
Kinetic and thermodynamic studies of hydrogen storage alloys as negative electrode materials for Ni/MH batteries: a review
Tliha, M.; Khaldi, C.; Boussami, S.; Fenineche, N.; El-Kedim, O.; Mathlouthi, H.; Lamloumi, J.
Journal of Solid State Electrochemistry, 2013, Vol. 18, N° 3, pp 577-593
Preparation of dense silicate electrolyte coating with low pressure plasma spraying and very low pressure plasma spraying for intermediate-temperature solid oxide fuel cells
Sun, Fu; Zhang, Nannan; Li, Jinglong; Liao, Hanlin
Journal of Power Sources, 2013, Vol. 223, pp 36-41
Magnetic, structural and thermal properties of the Finemet-type powders prepared by mechanical alloying
Alleg, S.; Kartout, S.; Ibrir, M.; Azzaza, S.; Fenineche, N. E.; Sunol, J. J.
Journal of Physics and Chemistry of Solids, 2013, Vol. 74, N° 4, pp 550-557
A study on electrodeposited Co-Mo alloys thin films
Messaoudi, Y.; Fenineche, N.; Guittoum, A.; Azizi, A.; Schmerber, G.; Dinia, A.
Journal of Materials Science-Materials in Electronics, 2013, Vol. 24, N° 8, pp 2962-2969
Microstructure and Magnetic Properties of Fe-Ni Alloy Fabricated by Selective Laser Melting Fe/Ni Mixed Powders
Zhang, Baicheng; Fenineche, Nour-Eddine; Liao, Hanlin; Coddet, Christian
Journal of Materials Science & Technology, 2013, Vol. 29, N° 8, pp 757-760
Microstructure and Transformation Behavior of in-situ Shape Memory Alloys by Selective Laser Melting Ti-Ni Mixed Powder
Zhang, Baicheng; Chen, Jing; Coddet, Christian
Journal of Materials Science & Technology, 2013, Vol. 29, N° 9, pp 863-867
Magnetic properties of in-situ synthesized FeNi3 by selective laser melting Fe-80%Ni powders
Zhang, Baicheng; Fenineche, Nour-Eddine; Liao, Hanlin; Coddet, Christian
Journal of Magnetism and Magnetic Materials, 2013, Vol. 336, pp 49-54
The effect of the temperature on the electrochemical properties of the hydrogen storage alloy for nickel-metal hydride accumulators
Khaldi, C.; Boussami, S.; Tliha, M.; Azizi, S.; Fenineche, N.; El-Kedim, O.; Mathlouthi, H.; Lamloumi, J.
Journal of Alloys and Compounds, 2013, Vol. 574, pp 59-66
Microstructure and magnetic properties of Ni3Fe solid solution thin films deposited by DC-magnetron sputtering
Yazdi, M. Arab Pour; Fenineche, N.; Aubry, E.; Kaibi, A.; Billard, A.
Journal of Alloys and Compounds, 2013, Vol. 550, pp 252-257
Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting
Song, Bo; Dong, Shujuan; Coddet, Pierre; Zhou, Genshu; Ouyang, Sheng; Liao, Hanlin; Coddet, Christian
Journal of Alloys and Compounds, 2013, Vol. 579, pp 415-421
Ab initio study of ZnCoO diluted magnetic semiconductor and its magnetic properties
Lardjane, S.; Merad, G.; Fenineche, N.; Billard, A.; Faraoun, H. I.
Journal of Alloys and Compounds, 2013, Vol. 551, pp306-311
The effect of the temperature on the electrochemical properties of the hydrogen storage alloy for nickel-metal hydride accumulators
Khaldi, C.; Boussami, S.; Tliha, M.; Azizi, S.; Fenineche, N.; El-Kedim, O.; Mathlouthi, H.; Lamloumi, J.
Journal of Alloys and Compounds, 2013, Vol. 574, pp 59-66
A 3D finite-difference model for the effective thermal conductivity of thermal barrier coatings produced by plasma spraying
Qiao, Jiang-Hao; Bolot, Rodolphe; Liao, Hanlin; Bertrand, Pierre; Coddet, Christian
International Journal of Thermal Sciences, 2013, Vol. 65, pp 120-126
Elastic properties of perovskite-type hydride NaMgH3 for hydrogen storage
Bouhadda, Y.; Bououdina, M.; Fenineche, N.; Boudouma, Y.
International Journal of Hydrogen Energy, 2013, Vol. 38, N° 3, pp 1484-1489
Manufacture of Fe-Al cube part with a sandwich structure by selective laser melting directly from mechanically mixed Fe and Al powders
Song, Bo; Dong, Shujuan; Liao, Hanlin; Coddet, Christian
International Journal of Advanced Manufacturing Technology, 2013, Vol. 69, N° 5, pp 1323-1330
Characterization of PCFC-Electrolytes Deposited by Reactive Magnetron Sputtering; Comparison with Ceramic Bulk Samples
Yazdi, M. Arab Pour; Briois, P.; Georges, S.; Costa, R.; Billard, A.
Fuel Cells, 2013, Vol. 13, N° 4, pp 549-555
Influence of metallurgical states on the corrosion behaviour of Al-Zn PVD coatings in saline solution
Perez, A.; Billard, A.; Rebere, C.; Berziou, C.; Touzain, S.; Creus, J.
Corrosion Science, 2013, Vol. 74, pp 240-249
Electronic and elastic properties of Mg7TiH16 hydrogen storage material
Bouhadda, Y.; Bououdina, M.; Fenineche, N.; Boudouma, Y.
Computational Materials Science, 2013, Vol. 78, pp 110-115
Microstructure evolution and density behavior of CP Ti parts elaborated by Self-developed vacuum selective laser melting system
Zhang, Baicheng; Liao, Hanlin; Coddet, Christian
Applied Surface Science, 2013, Vol. 279, pp 310-316
Microstructure and magnetic properties of atmospheric plasma sprayed Fe-40Al coating obtained from nanostructured powders
Song, Bo; Dong, Shujuan; Fenineche, Nour-Eddine; Aubry, Eric; Grosdidier, Thierry; Liao, Hanlin; Coddet, Christian
Applied Physics a-Materials Science & Processing, 2013, Vol. 113, N° 3, pp 787-792
X-ray line profile analysis of the ball-milled Fe-30Co alloy
Laala-Bouali, H.; Bentayeb, F.-Z.; Louidi, S.; Guo, X.; Tria, S.; Sunol, J. J.; Escoda, L.
Advanced Powder Technology, 2013, Vol. 24, N° 1, pp 168-174
Deposition behavior of thermally softened copper particles in cold spraying
Yin, Shuo; Wang, Xiaofang; Suo, Xinkun; Liao, Hanlin; Guo, Zhiwei; Li, Wenya; Coddet, Christian
Acta Materialia, 2013, Vol. 61, N° 14, pp 5105-5118
Improvement of the corrosion resistance of Al-based alloys coatings deposited by cold spray
Wang, Yingying; Normand, Bernard; Mary, Nicolas; Yu, Min; Liao, Hanlin
Annales De Chimie-Science Des Materiaux, 2013, Vol. 38, N°1, pp 1-12
Electrochemical nucleation behaviours and properties of electrodeposited Co-Ni alloy thin films
Tebbakh, S.; Beniaiche, A.; Fenineche, N.; Azizi, A.; Schmerber, G.; Dinia, A.
Transactions of the Institute of Metal Finishing, 2013, Vol. 91, N°1, pp 17-23
Electrochemical Production of Magnetic Co-Mo Alloys Thin Films
Messaoudi, Y.; Azizi, A.; Fenineche, N.; Schmerber, G.; Dinia, A.
Sensor Letters, 2013, Vol. 11, N°9, pp 1622-1626
Potential Effect on the Initial Stages of the Electrocrystalization of Ni-Fe Alloys and Structural Properties
Messaadi, S.; Daamouche, M.; Guittoum, A.; Medouer, H.; Fenineche, N.; Zidani, I.
Sensor Letters, 2013, Vol. 11, N°8, pp 1472-1477
Structural, Microstructural and Magnetic Properties of Nanocrystalline Ni75Fe25 Compound Produced by Mechanical Alloying
Kaibi, A.; Guittoum, A.; Fenineche, N.; Souami, N.; Kechouane, M.
Sensor Letters, 2013, Vol. 11, N°12, pp 2250-2256
Effect of Dry-ice Blasting on the Microstructure and Properties of Plasma-sprayed CoNiCrAlY Coating
Dong, Shujuan; Song, Bo; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Advanced Materials Science and Technology, (ifamst-8), 2013, Vol. 750, pp 268-275
Structural, electrical and magnetic investigations of conductive ZnO:Co thin films deposited by DC reactive magnetron co-sputtering
Lardjane, S.; Yazdi, M. Arab Pour; Fenineche, N.; Merad, G.; Feraoun, H. I.; Billard, A.
Key Engineering Materials, 2013, Vol. 543, pp 251-254
Dodecane sensing with double substituted LaCoO3 nanowires deposited by reactive magnetron sputtering
Yazdi, Mohammad Arab Pour; Sanchez, Jean Baptiste; Monsifrot, Eric; Briois, Pascal; Berger, Franck; Billard, Alain
Key Engineering Materials, 2013, Vol. 543, pp 192-195
Synthesis Of Half Fuel Cell Ni-YSZ / YSZ On Porous Metallic Support By Dry Surface Deposition Processes
Fondard, J.; Bertrand, P.; Billard, A.; Skrabs, S.; Franco, Th; Bertrand, G.; Briois, P.
ECS Transaction, 2013, Vol. 57, N°1, pp 673-682
YSZ Films Prepared by Reactive Magnetron Sputtering: Effect of the Thickness on the Electrical Properties
Briois, P.; Yu, L.; Yazdi, M. Arab Pour; Georges, S.; Billard, A.
ECS Transaction, 2013, Vol. 57, N°1, pp 975-982
Synthesis and characterization on atomphospheric plasma sprayed amorphous silica doped hydrxoyapatite coatings
Xu, J. L.; Joguet, D.; Cizek, J.; Khor, K. A.; Liao, H. L.; Coddet, C.; Chen, W. N.
Surface & Coatings Technology, 2012, Vol. 206, N° 22, pp 4659-4665
Fabrication and microstructure characterization of selective laser-melted FeAl intermetallic parts
Song, Bo; Dong, Shujuan; Coddet, Pierre; Liao, Hanlin; Coddet, Christian
Surface & Coatings Technology, 2012, Vol. 206, N° 22, pp 4704-4709
Application of robot offline programming in thermal spraying
Deng, SiHao; Cai, ZhenHua; Fang, DanDan; Liao, HanLin; Montavon, Ghislain
Surface & Coatings Technology, 2012, Vol. 206, N° 19-20, pp 3875-3882
Laser densification of organic coating: Effects of laser wavelength, operating parameters and substrate properties
Demian, Camelia; Costil, Sophie; Sallamand, Pierre; Soveja, Adriana; Liao, Hanlin; Mattei, Simone
Surface & Coatings Technology, 2012, Vol. 206, N° 16, pp 3526-3533
On the elastic modulus and hardness of co-sputtered Zr-Cu-(N) thin metal glass films
Coddet, P.; Sanchette, F.; Rousset, J. C.; Rapaud, O.; Coddet, C.
Surface & Coatings Technology, 2012, Vol. 206, N° 17, pp 3567-3571
Effect of Na diffusion from glass substrate on the microstructural and photocatalytic properties of post-annealed TiO2 films synthesised by reactive sputtering
Aubry, E.; Lambert, J.; Demange, V.; Billard, A.
Surface & Coatings Technology, 2012, Vol. 206, N° 23, pp 4999-5005
Electrical properties of BaCe0.8Zr0.1Y0.1O3 (-) (alpha) ceramics and thin films designed by reactive magnetron sputtering: Effect of the electrochemical cell configuration
Georges, S.; Yu, L.; Yazdi, M. Arab Pour; Costa, R.; Briois, P.; Billard, A.
Solid State Ionics, 2012, Vol. 229, pp 42217
Rapid manufacturing of metallic objects
Karunakaran, K. P.; Bernard, Alain; Suryakumar, S.; Dembinski, Lucas; Taillandier, Georges
Rapid Prototyping Journal, 2012, Vol. 18, N° 4, pp 264-280
Velocities of copper droplets in the De Laval atomization process
Planche, M. P.; Khatim, O.; Dembinski, L.; Coddet, C.; Girardot, L.; Bailly, Y.
Powder Technology, 2012, Vol. 229, pp 191-198
Improvement of adhesion of plasma-sprayed Al2O3 coatings by using dry-ice blasting
Dong, Shujuan; Song, Bo; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Materials Letters, 2012, Vol. 66, N° 1, pp 289-291
Architecture and phases composition of suspension plasma sprayed alumina-titania sub-micrometer-sized coatings
Darut, Geoffrey; Klyatskina, Elizaveta; Valette, Stephane; Carles, Pierre; Denoirjean, Alain; Montavon, Ghislain; Ageorges, Helene; Segovia, Francisco; Salvador, Maria
Materials Letters, 2012, Vol. 67, N° 1, pp 241-244
Comparison of the intrinsic properties of EBPVD Al-Ti and Al-Mg coatings
Perez, A.; Sanchette, F.; Billard, A.; Rebere, C.; Berziou, C.; Touzain, S.; Creus, J.
Materials Chemistry and Physics, 2012, Vol. 132, N° 1, pp 154-161
Effects of processing parameters on properties of selective laser melting Mg-9%Al powder mixture
Zhang, Baicheng; Liao, Hanlin; Coddet, Christian
Materials & Design, 2012, Vol. 34, pp 753-758
Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V
Song, Bo; Dong, Shujuan; Zhang, Baicheng; Liao, Hanlin; Coddet, Christian
Materials & Design, 2012, Vol. 35, pp 120-125
Measurement of Specific Enthalpy Under Very Low Pressure Plasma Spray Condition
Zhang, N.; Sun, F.; Zhu, L.; Planche, M. P.; Liao, H.; Dong, C.; Coddet, C.
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 3, pp 489-495
Finite Element Simulation of Impacting Behavior of Particles in Cold Spraying by Eulerian Approach
Yu, M.; Li, W.-Y.; Wang, F. F.; Liao, H. L.
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 3, pp 745-752
Optimizing Compliance and Thermal Conductivity of Plasma Sprayed Thermal Barrier Coatings via Controlled Powders and Processing Strategies
Tan, Yang; Srinivasan, Vasudevan; Nakamura, Toshio; Sampath, Sanjay; Bertrand, Pierre; Bertrand, Ghislaine
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 5, pp 950-962
Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings
Suo, X. K.; Yu, M.; Li, W. Y.; Planche, M. P.; Liao, H. L.
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 5, pp 1091-1098
Investigation of Deposition Behavior of Cold-Sprayed Magnesium Coating
Suo, X. K.; Guo, X. P.; Li, W. Y.; Planche, M. P.; Liao, H. L.
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 5, pp 831-837
Effect of Heat Treatment Temperature on Performance of Plasma-Sprayed Apatite-Lanthanum Silicate Coatings as Electrolytes for IT-SOFC
Sun, Fu; Zhang, Nannan; Liao, Hanlin; Li, Jinglong
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 6, pp 1257-1262
Effect of Pulsed Laser Ablation and Continuous Laser Heating on the Adhesion and Cohesion of Cold Sprayed Ti-6Al-4V Coatings
Perton, M.; Costil, S.; Wong, W.; Poirier, D.; Irissou, E.; Legoux, J.-G.; Blouin, A.; Yue, S.
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 6, pp 1322-1333
An Investigation on Temperature Distribution Within the Substrate and Nozzle Wall in Cold Spraying by Numerical and Experimental Methods
Li, Wen-Ya; Yin, Shuo; Guo, Xueping; Liao, Hanlin; Wang, Xiao-Fang; Coddet, Christian
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 1, pp 41-48
Application of External Axis in Robot-Assisted Thermal Spraying
Deng, Sihao; Fang, Dandan; Cai, Zhenhua; Liao, Hanlin; Montavon, Ghislain
Journal of Thermal Spray Technology, 2012, Vol. 21, N° 6, pp 1203-1215
Preparation and characterization of magnesium coating deposited by cold spraying
Suo, Xinkun; Guo, Xueping; Li, Wenya; Planche, Marie-Pierre; Bolot, Rodolphe; Liao, Hanlin; Coddet, Christian
Journal of Materials Processing Technology, 2012, Vol. 212, N° 1, pp 100-105
Studies of magnetic properties of permalloy (Fe-30%Ni) prepared by SLM technology
Zhang, Baicheng; Fenineche, Nour-Eddine; Zhu, Lin; Liao, Hanlin; Coddet, Christian
Journal of Magnetism and Magnetic Materials, 2012, Vol. 324, N° 4, pp 495-500
Process parameter selection for selective laser melting of Ti6Al4V based on temperature distribution simulation and experimental sintering
Song, Bo; Dong, Shujuan; Liao, Hanlin; Coddet, Christian
International Journal of Advanced Manufacturing Technology, 2012, Vol. 61, N° 9, pp 967-974
Rectangular microscale carbon tubes with protuberant wall for high-rate electrochemical capacitors
Chen, Yuanzhen; Wang, Beiping; Dong, Shujuan; Wang, Yanping; Liu, Yongning
Electrochimica Acta, 2012, Vol. 80, pp 34-40
Reactivity classification in saline solution of magnetron sputtered or EBPVD pure metallic, nitride and Al-based alloy coatings
Creus, J.; Berziou, C.; Cohendoz, S.; Perez, A.; Rebere, C.; Reffass, M.; Touzain, S.; Allely, C.; Gachon, Y.; Heau, C.; Sanchette, F.; Billard, A.
Corrosion Science, 2012, Vol. 57, pp 162-173
Improvement of surface properties of SLM parts by atmospheric plasma spraying coating
Zhang, Baicheng; Zhu, Lin; Liao, Hanlin; Coddet, Christian
Applied Surface Science, 2012, Vol. 259, pp 777-782
Deformation behavior of the oxide film on the surface of cold sprayed powder particle
Yin, Shuo; Wang, Xiaofang; Li, Wenya; Liao, Hanlin; Jie, Hongen
Applied Surface Science, 2012, Vol. 259, pp 294-300
Modelling of entire friction stir welding process by explicit finite element method
Yu, M.; Li, W. Y.; Li, J. L.; Chao, Y. J.
Materials Science and Technology, 2012, Vol. 28, N°7, pp 812-817
Effect of Mesh Resolution on the Particle Deformation during Cold Spraying by Eulerian Formulation
Wenya, Li; Min, Yu; Hui, Wu; Hanlin, Liao
Rare Metal Materials and Engineering, 2012, Vol. 41, pp 327-330
Cold-Sprayed Magnesium Coatings Deposited with Helium and Air
Suo, X. K.; Guo, X. P.; Li, W. Y.; Planche, M. P.; Bolot, R.; Liao, H. L.; Coddet, C.
Rare Metal Materials and Engineering, 2012, Vol. 41, pp 61-63
Morphology evolution mechanism of single tracks of FeAl intermetallics in selective laser melting
Song, B.; Dong, S. J.; Liao, H. L.; Coddet, C.
Materials Research Innovations, 2012, Vol. 16, N°5, pp 321-325
Study on the chemical deposition on steel of zinc phosphate with other metallic cations and hexamethilen tetramine. I. Preparation and structural and chemical characterization
Sandu, A. V.; Coddet, C.; Bejinariu, C.
Journal of Optoelectronics and Advanced Materials, 2012, Vol. 14, N°7, pp 699-703
A Comparative Study on Surface Structure of Thin Zinc Phosphates Layers Obtained Using Different Deposition Procedures on Steel
Sandu, Andrei Victor; Coddet, Christian; Bejinariu, Costica
Revista De Chimie, 2012, Vol. 63, N°4, pp 401-406
Robot Off-Line Programming for Thermal Spraying
Fang, Dandan; Cai, Zhenhua; Deng, Sihao; Liao, Hanlin; Coddet, Christian
Rare Metal Materials and Engineering, 2012, Vol. 41, pp 13-17
Modelling of dry ice blasting and its application in thermal spray
Dong, S. J.; Song, B.; Hansz, B.; Liao, H. L.; Coddet, C.
Materials Research Innovations, 2012, Vol. 16, N°1, pp 61-66
Publications déposées en 2008 – 2011
An investigation of the mechanical properties and wear resistance of NiCrBSi coatings carried out by in situ laser remelting
Serres, Nicolas; Hlawka, Francoise; Costil, Sophie; Langlade, Cecile; Machi, Frederique
Wear, 2011, Vol. 270, N° 9, pp 640-649
Characterizations of CrN/a-CNx nanolayered coatings deposited by DC reactive magnetron sputtering of Cr and graphite targets
Briois, P.; Mercs, D.; Demange, V.; Banakh, O.; Sanchette, F.; Billard, A.
Vacuum, 2011, Vol. 86, N° 2, pp 206-209
Influence of Ti-6Al-4 V and Al 2017 substrate morphology on Ni-Al coating adhesion – Impacts of laser treatments
Danlos, Y.; Costil, S.; Liao, H.; Coddet, C.
Surface & Coatings Technology, 2011, Vol. 205, N° 8, pp 2702-2708
Reactive co-sputter deposition of YSZ coatings using plasma emission monitoring
Coddet, P.; Pera, M. C.; Billard, A.
Surface & Coatings Technology, 2011, Vol. 205, N° 16, pp 3987-3991
Deposition and characterization of cold sprayed nanocrystalline NiTi
Tria, S.; Elkedim, O.; Hamzaoui, R.; Guo, X.; Bernard, F.; Millot, N.; Rapaud, O.
Powder Technology, 2011, Vol. 210, N° 2, pp 181-188
Electrochemical Characterisations of Al2O3-13% TiO2 Coated by Atmospheric Plasma Spray
Kanta, A.-F.; Planche, M.-P.; Montavon, G.
Plasma Chemistry and Plasma Processing, 2011, Vol. 31, N° 6, pp 867-877
Structural, electronic, elastic and thermodynamical properties of BaxSr1-xLiH3
Bahloul, B.; Bentabet, A.; Amirouche, L.; Bouhadda, Y.; Fenineche, N.
Physica Scripta, 2011, Vol. 84, N° 6, pp 65705
Hydrogen storage: Lattice dynamics of orthorhombic NaMgH3
Bouhadda, Youcef; Fenineche, Noureddine; Boudouma, Youcef
Physica B-Condensed Matter, 2011, Vol. 406, N° 4, pp 1000-1003
Effect of vacuum heat treatment on microstructure and microhardness of cold-sprayed TiN particle-reinforced Al alloy-based composites
Li, Wen-Ya; Yang, Changlin; Liao, Hanlin
Materials & Design, 2011, Vol. 32, N° 1, pp 388-394
Characteristics of Cu Film Deposited Using VLPPS
Zhang, N.; Sun, F.; Zhu, L.; Verdy, C.; Planche, M. P.; Liao, H.; Dong, C.; Coddet, C.
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 1, pp 351-357
Electron Temperature and Density of the Plasma Measured by Optical Emission Spectroscopy in VLPPS Conditions
Zhang, N.; Sun, F.; Zhu, L.; Planche, M. P.; Liao, H.; Dong, C.; Coddet, C.
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 6, pp 1321-1327
Examination on Substrate Preheating Process in Cold Gas Dynamic Spraying
Yin, Shuo; Wang, Xiao-fang; Li, Wen-ya; Guo, Xue-ping
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 4, pp 852-859
Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray and In Situ Laser Remelting Process
Serres, Nicolas; Hlawka, Francoise; Costil, Sophie; Langlade, Cecile; Machi, Frederique
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 1, pp 336-343
An Insight into Suspension Plasma Spray: Injection of the Suspension and Its Interaction with the Plasma Flow
Marchand, O.; Girardot, L.; Planche, M. P.; Bertrand, P.; Bailly, Y.; Bertrand, G.
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 6, pp 1310-1320
Investigation of Impact Behavior of Cold-Sprayed Large Annealed Copper Particles and Characterization of Coatings
Li, Wenya; Guo, Xueping; Yu, Min; Liao, Hanlin; Coddet, Christian
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 1, pp 252-259
Pre-/During-/Post-Laser Processes to Enhance the Adhesion and Mechanical Properties of Thermal-Sprayed Coatings with a Reduced Environmental Impact
Garcia-Alonso, D.; Serres, N.; Demian, C.; Costil, S.; Langlade, C.; Coddet, C.
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 4, pp 719-735
Electrical Properties of Atmospheric Plasma-Sprayed La-10(SiO4)(6)O-3 Electrolyte Coatings
Gao, Wei; Li, Wen-Ya; Liao, Han-Lin; Coddet, Christian
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 4, pp 888-891
Influence of the Surface State on the Adherence of the Coating: Case of an Alumina Coating Plasma Sprayed on SiC Composites
Costil, S.; Lukat, S.; Verdy, C.; Coddet, C.
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 1, pp 68-75
Predicting the Thermal Conductivity of AlSi/Polyester Abradable Coatings: Effects of the Numerical Method
Bolot, Rodolphe; Seichepine, Jean-Louis; Qiao, Jiang Hao; Coddet, Christian
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 1, pp 39-47
Modeling of the Plasma Flow and Anode Region Inside a Direct Current Plasma Gun
Bolot, Rodolphe; Coddet, Christian; Allimant, Alain; Billieres, Dominique
Journal of Thermal Spray Technology, 2011, Vol. 20, N° 1, pp 21-27
Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review
Fauchais, P.; Montavon, G.; Lima, R. S.; Marple, B. R.
Journal of Physics D-Applied Physics, 2011, Vol. 44, N° 9, pp
Improvement of flame spraying PEEK coating characteristics using lasers
Soveja, Adriana; Sallamand, Pierre; Liao, Hanlin; Costil, Sophie
Journal of Materials Processing Technology, 2011, Vol. 211, N° 1, pp 12-13
Corrosion properties of in situ laser remelted NiCrBSi coatings comparison with hard chromium coatings
Serres, Nicolas; Hlawka, Francoise; Costil, Sophie; Langlade, Cecile; Machi, Frederique
Journal of Materials Processing Technology, 2011, Vol. 211, N° 1, pp 133-140
Approach of the spark plasma sintering mechanism in Zr57Cu20Al10Ni8Ti5 metallic glass
Nowak, Sophie; Perriere, Loic; Dembinski, Lucas; Tusseau-Nenez, Sandrine; Champion, Yannick
Journal of Alloys and Compounds, 2011, Vol. 509, N° 3, pp 1011-1019
Thermodynamic functions from lattice dynamic of KMgH3 for hydrogen storage applications
Bouhadda, Youcef; Kheloufi, Nawal; Bentabet, Abdelouahab; Boudouma, Youcef; Fenineche, Noureddine; Benyalloul, Kamel
Journal of Alloys and Compounds, 2011, Vol. 509, N° 37, pp 8994-8998
Microstructure and wear behavior of SiCp-reinforced magnesium matrix composite by cold spraying
Suo, Xinkun; Guo, Xueping; Li, Wenya; Planche, Marie-Pierre; Zhang, Chao; Liao, Hanlin
International Journal of Advanced Manufacturing Technology, 2011, Vol. 314-316, pp 253-258
Planar Solid Oxide Fuel Cell: Electrolyte Deposited by Reactive Magnetron Sputtering and Cell Test
Coddet, P.; Pera, M.-C.; Billard, A.
Fuel Cells, 2011, Vol. 11, N° 2, pp 158-164
Intelligent system for prediction and control: Application in plasma spray process
Kanta, A.-F.; Montavon, G.; Berndt, C. C.; Planche, M.-P.; Coddet, C.
Expert Systems with Applications, 2011, Vol. 38, N° 1, pp 260-271
Effect of vacuum heat treatment on tensile strength and fracture performance of cold-sprayed Cu-4Cr-2Nb coatings
Yu, Min; Li, Wen-Ya; Zhang, Chao; Liao, Hanlin
Applied Surface Science, 2011, Vol. 257, N° 14, pp 5972-5976
Microstructures and mechanical properties of metallic NiCrBSi and composite NiCrBSi-WC layers manufactured via hybrid plasma/laser process
Serres, Nicolas; Hlawka, Francoise; Costil, Sophie; Langlade, Cecile; Machi, Frederique
Applied Surface Science, 2011, Vol. 257, N° 12, pp 5132-5137
Improvement in the properties of plasma-sprayed metallic, alloy and ceramic coatings using dry-ice blasting
Dong, Shujuan; Song, Bo; Hansz, Bernard; Liao, Hanlin; Coddet, Christian
Applied Surface Science, 2011, Vol. 257, N° 24, pp 10828-10833
Silicon oxynitride thin films synthesised by the reactive gas pulsing process using rectangular pulses
Aubry, E.; Weber, S.; Billard, A.; Martin, N.
Applied Surface Science, 2011, Vol. 257, N° 23, pp 10065-10071
Investigation of mechanically attrited structures induced by repeated impacts on an AISI1045 steel
Kermouche, Guillaume; Pacquaut, Guillaume; Langlade, C.; Bergheau, Jean-Michel
Comptes Rendus Mecanique, 2011, Vol. 339, N°7, pp552-562
Microstructure and Wear Behavior of SiCP-Reinforced Magnesium Matrix Composite by Cold Spraying
Suo, Xin Kun; Guo, Xue Ping; Li, Wen Ya; Planche, Marie Pierre; Zhang, Chao; Liao, Han Lin
Advanced Materials Research, 2011, Vol. 314-316, pp 253-258
Combined plasma spray and in situ laser melting treatment of NiCrBSi powder
Serres, N.; Hlawka, F.; Costil, S.; Langlade, C.; Machi, F.; Cornet, A.
Journal of Optoelectronics and Advanced Materials, 2010, Vol. 12, N°3, pp 505-510
Reactive deposition of Al-N coatings in Ar/N-2 atmospheres using pulsed-DC or high power impulse magnetron sputtering discharges
Guillaumot, A.; Lapostolle, F.; Dublanche-Tixier, C.; Oliveira, J. C.; Billard, A.; Langlade, C.
Vacuum, 2010, Vol. 85, N° 2, pp 120-125
Microstructure and tribological behavior of suspension plasma sprayed Al2O3 and Al2O3-YSZ composite coatings
Tingaud, O.; Bertrand, P.; Bertrand, G.
Surface & Coatings Technology, 2010, Vol. 205, N° 4, pp 1004-1008
Microstructures and environmental assessment of metallic NiCrBSi coatings manufactured via hybrid plasma spray process
Serres, Nicolas; Hlawka, Francoise; Costil, Sophie; Langlade, Cecile; Machi, Frederique
Surface & Coatings Technology, 2010, Vol. 205, N° 4, pp 1039-1046
Characterization of suspension plasma-sprayed solid oxide fuel cell electrodes
Marchand, O.; Bertrand, P.; Mougin, J.; Comminges, C.; Planche, M.-P.; Bertrand, G.
Surface & Coatings Technology, 2010, Vol. 250, N° 4, pp 993-998
Laser surface texturing (LST) treatment before thermal spraying: A new process to improve the substrate-coating adherence
Lamraoui, A.; Costil, S.; Langlade, C.; Coddet, C.
Surface & Coatings Technology, 2010, Vol. 205, N° 4, pp 164-167
Processing parameter effect on the splat diameters of the droplets produced by liquid metal atomization using De Laval nozzle
Khatim, O.; Planche, M. P.; Dembinski, L.; Bailly, Y.; Coddet, C.
Surface & Coatings Technology, 2010, Vol. 205, N° 4, pp 1171-1175
In-flight and upon impact particle characteristics modelling in plasma spray process
Danlos, Y.; Costil, S.; Guo, X.; Liao, H.; Coddet, C.
Surface & Coatings Technology, 2010, Vol. 204, N° 9, pp 1542-1548
Ablation laser and heating laser combined to cold spraying
Danlos, Y.; Costil, S.; Guo, X.; Liao, H.; Coddet, C.
Surface & Coatings Technology, 2010, Vol. 205, N° 4, pp 1055-1059
Surface treatment effects on ceramic matrix composites: Case of a thermal sprayed alumina coating on SiC composites
Costil, Sophie; Lukat, Sebastien; Bertrand, Pierre; Langlade, Cecile; Coddet, Christian
Surface & Coatings Technology, 2010, Vol. 205, N° 4, pp 1047-1054
Effect of thermal treatment on the effective thermal conductivity of YPSZ coatings
Bolot, Rodolphe; Qiao, Jiang-Hao; Bertrand, Ghislaine; Bertrand, Pierre; Coddet, Christian
Surface & Coatings Technology, 2010, Vol. 205, N° 4, pp 1034-1038
Mechanical and tribological properties of CrN/Ag and CrSiN/Ag nanoscale multilayers
Baraket, M.; Mercs, D.; Zhang, Z. G.; Coddet, C.
Surface & Coatings Technology, 2010, Vol. 204, N° 15, pp 2386-2391
Microstructure and magnetic properties of HVOF thermally sprayed Fe75Si15B10 coatings
Alleg, S.; Ibrir, M.; Fenineche, N. E.; Bensalem, R.; Sunol, J. J.
Surface & Coatings Technology, 2010, Vol. 205, N° 2, pp281-286
Estimation of the stress relief induced in CrN thin films by buckling
Lamri, S.; Langlade, C.; Kermouche, G.; Martinez, V.
Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2010, Vol. 527, N° 29-30, pp 7912-7919
Remelting of Flame Spraying PEEK Coating Using Lasers
Soveja, A.; Costil, S.; Liao, H.; Sallamand, P.; Coddet, C.
Journal of Thermal Spray Technology, 2010, Vol. 19, N° 1, pp 439-447
Structure and Tribological Performance of Nanostructured ZrO2-3 mol% Y2O3 Coatings Deposited by Air Plasma Spraying
Liang, B.; Zhang, G.; Liao, H. L.; Coddet, C.; Ding, C. X.
Journal of Thermal Spray Technology, 2010, Vol. 19, N° 6, pp 1163-1170
Influence of Spray Materials and Their Surface Oxidation on the Critical Velocity in Cold Spraying
Li, C.-J.; Wang, H.-T.; Zhang, Q.; Yang, G.-J.; Li, W.-Y.; Liao, H. L.
Journal of Thermal Spray Technology, 2010, Vol. 19, N° 1, pp 95-101
From Powders to Thermally Sprayed Coatings
Fauchais, P.; Montavon, G.; Bertrand, G.
Journal of Thermal Spray Technology, 2010, Vol. 19, N° 1, pp 56-80
The Effect of Robot Kinematics on the Coating Thickness Uniformity
Fang, D.; Deng, S.; Liao, H.; Coddet, C.
Journal of Thermal Spray Technology, 2010, Vol. 19, N° 4, pp 796-804
Cold-Spraying Coupled to Nano-Pulsed Nd-YaG Laser Surface Pre-treatment
Christoulis, D. K.; Guetta, S.; Irissou, E.; Guipont, V.; Berger, M. H.; Jeandin, M.; Legoux, J.-G.; Moreau, C.; Costil, S.; Boustie, M.; Ichikawa, Y.; Ogawa, K.
Journal of Thermal Spray Technology, 2010, Vol. 19, N° 5, pp1062-1073
Ab initio calculations study of the electronic, optical and thermodynamic properties of NaMgH3, for hydrogen storage
Bouhadda, Youcef; Boudouma, Youcef; Fennineche, Nour-eddine; Bentabet, Abdelouahab
Journal of Physics and Chemistry of Solids, 2010, Vol. 71, N° 9, pp 1264-1268
Magnetic and structural characterization of the mechanically alloyed Fe75Si15B10 powders
Alleg, S.; Ibrir, M.; Fenineche, N. E.; Azzaza, S.; Bensalem, R.; Sunol, J. J.
Journal of Alloys and Compounds, 2010, Vol. 494, N° 1, pp 109-115
Influence of Substrate Biasing on (Al, Ti)N Thin Films Deposited by a Hybrid HiPIMS/DC Sputtering Process
Guillaumot, A.; Lapostolle, F.; Langlade, C.; Billard, A.; Oliveira, J. C.; Cavaleiro, A.; Dublanche-Tixier, C.
Ieee Transactions on Plasma Science, 2010, Vol. 38, N° 11, pp 3044-3045
Investigation of the CO oxidation rate oscillations using electrochemical promotion of catalysis over sputtered-Pt films interfaced with YSZ
Lizarraga, L.; Souentie, S.; Mazri, L.; Billard, A.; Vernoux, P.
Electrochemistry Communications, 2010, Vol. 12, N° 10, pp 1310-1313
Corrosion behaviour of magnetron-sputtered Al1-x-Mn-x coatings in neutral saline solution
Reffass, M.; Berziou, C.; Rebere, C.; Billard, A.; Creus, J.
Corrosion Science, 2010, Vol. 52, N° 11, pp 3615-3623
Electrochemical catalysis for propane combustion using nanometric sputtered-deposited Pt films
Lizarraga, L.; Guth, M.; Billard, A.; Vernoux, P.
Catalysis Today, 2010, Vol. 99, N° 3, pp 61-65
Different spray processes for different Al2O3 coating properties
Planche, M. P.; Costil, S.; Verdy, C.; Coddet, C.
Applied Physics a-Materials Science & Processing, 2010, Vol. 99, N° 3, pp 665-671
Significant influence of particle surface oxidation on deposition efficiency, interface microstructure and adhesive strength of cold-sprayed copper coatings
Li, Wen-Ya; Li, Chang-Jiu; Liao, Hanlin
Applied Surface Science, 2010, Vol. 256, N°16, pp 665-671
Failure mechanisms of thin hard coatings submitted to repeated impacts: Influence of the film thickness
Lamri, S.; Langlade, C.; Kermouche, G.
Advances in Structural Analysis of Advanced Materials, 2010, Vol. 112, pp 73-82
Effect of standoff distance on coating deposition characteristics in cold spraying
LI W.Y., ZHANG C., GUO X.P., ZHANG G., LIAO H.L., LI C.J., CODDET C.
Materials and Design, 2008, Vol. 29, pp 297-304
Artificial neural networks vs. fuzzy logic: Simple tools to predict and control complex processes – Application to plasma spray processes
KANTA A.F., MONTAVON G., VARDELLE M., PLANCHE M.P., BERNDT C.C., CODDET C.
Journal of Thermal Spray Technology, 2008, Vol. 17, N° 3, pp 365-376
Friction moment prediction of HVOF coatings and electroplated hard chromium
SAHRAOUI T., GUESSASMA S., FENINECHE N.E.
Materials Letters, 2008, Vol. 62, pp 473-477
Development and characterisation of (Ni, Cu, Co)-YSZ and Cu-Co-YSZ cermets anode materials for SOFC application
BENYOUCEF A., KLEIN D., CODDET C., BENYOUCEF B.
Surface and coatings technology, 2008, Vol. 202, pp 2202-2207
Effect of friction time on flash shape and axial shortening of linear friction welded 45 steel
LI W.Y., MA T.J., YANG S.Q., XU Q.Z., ZHANG Y., LI J.L., LIAO H.L.
Materials letters, 2008, Vol. 62, pp 293-296
Blistering and spalling of thin hard coatings submitted to repeated impacts
LEDRAPPIER F., LANGLADE C., GACHON Y., VANNES B.
Surface and coatings technology, 2008, Vol. 202, pp 1789-1796
Cubic-to-tetragonal phase transition of HfO2 from computational study
TERKI R., BERTRAND G., AOURAG H., CODDET C.
Materials Letters, 2008, Vol. 62, pp 1484-1486
Microwave sintering of plasma-sprayed yttria stabilized zirconia electrolyte coating
ZHANG C., ZHANG G., LEPAROUX S., LIAO H., LI C.X., LI C.J., CODDET C.
Journal of the European Ceramic Society, 2008, Vol. 28, pp 2529-2538
Microstructures and corrosion behaviors of Zr modified CrN coatings deposited by DC magnetron sputtering
ZHANG Z.G., RAPAUD O., BONASSO N., MERCS D., DONG C., CODDET C.
Vacuum, 2008, Vol. 82, pp 1332-1336
Simulation of thermal properties of Ba1-xZrO3 compounds for thermal barrier coating applications
TERKI R., BERTRAND G., AOURAG H., CODDET C.
Computational Materials Science, 2008, Vol. 42, pp 416-420
Thermal properties of Ba1-xSrxZrO3 compounds from microscopic theory
TERKI R., BERTRAND G., AOURAG H., CODDET C.
Journal of Alloys and Compounds, 2008, Vol. 456, pp 508-513
Effect of feedstock powder characteristics on microstructure and mechanical properties of lanthanum silicate coatings deposited by atmospheric plasma spraying
GAO W., LIAO H., CODDET C.
Applied Surface Science, 2008, Vol. 254, pp 5548-5551
Suspension plasma spraying of YPSZ coatings: Suspension atomization and injection
RAMPON R., FILIATRE C., BERTRAND G.
Journal of Thermal Spray Technology, 2008, Vol. 17, N° 1, pp 105-114
Control of microstructures and properties of dc magnetron sputtering deposited chromium nitride films
ZHANG Z.G., RAPAUD O., BONASSO N., MERCS D., DONG C., CODDET C.
Vacuum, 2008, Vol. 82, pp 501-509
Effects of sliding velocity and applied load on the tribological mechanism of amorphous poly-ether-ether-ketone (PEEK)
ZHANG G., ZHANG C., NARDIN P., LI W.Y., LIAO H., CODDET C.
Tribology International, 2008, Vol. 41, pp 79-86
Structure and magnetic properties of mechanically alloyed Co and Co-Ni
GUESSASMA S., FENINECHE N.
Journal of Magnetism and Magnetic Materials, 2008, Vol. 320, pp 450-457
Temperature dependence of the tribological mechanisms of amorphous PEEK (polyetheretherketone) under dry sliding conditions
ZHANG G., YU H., ZHANG C., LIAO H., CODDET C.
Acta Materialia, 2008, Vol. 56, N° 10, pp 2182-2190
Artificial intelligence computation to establish relationships between APS process parameters and alumina-titania coating properties
KANTA A.F.,MONTAVON G., PLANCHE M.P., CODDET C.
Plasma chemistry and plasma processing, 2008, Vol. 28, pp 249-262
Characterizations of cold sprayed TiN particle reinforced Al2319 composite coating
LI W.Y., ZHANG G., LIAO H., CODDET C.
Journal of Materials Processing Technology, 2008, Vol. 202, pp 508-513
Characterizations of cold-sprayed nickel-alumina composite coatings with relatively large nickel-coated alumina powder
LI W.Y., ZHANG C., LIAO H., LI J., CODDET C.
Surface and Coatings Technology, 2008, Vol. 202, pp 4855-4860
Low conductivity plasma sprayed thermal barrier coating using hollow psz spheres: Correlation betweeb thermophysical properties and microstructure
BERTRAND G., BERTRAND P., ROY P., RIO C., MEVREL R.
Surface and coatings technology, 2008, Vol. 202, pp 1994-2001
Study on gas permeation behaviour through atmospheric plasma-sprayed yttria stabilized zirconia coating
ZHANG C., LI W.Y., PLANCHE M.P., LI C.X., LIAO H., LI C.J., CODDET C.
Surface and Coatings Technology, 2008, Vol. 202, pp 5055-5061
Microstructure and magnetic properties of FeSiBNbCu-Al cold spray coatings
CHERIGUI M., LI W., HAMZAOUI R., JI V., FENINECHE N., CODDET C.
The European Physical Journal Applied Physics, 2008, Vol. 43, pp 79-86
Effect of in-flight particle velocity on the performance of plasma-sprayed YSZ electrolyte coaing for solid oxide fuel cells
ZHANG C., LI C.J., LIAO H., PLANCHE M.P., LI C.X., CODDET C.
Surface and coatings technology, 2008, Vol. 202, pp 2654-2660
Plasma spray synthesis of La10(SiO4)6O3 as a new electrolyte for intermediate temperature solid oxide fuel cells
GAO W., LIAO H., CODDET C.
ournal of Power Sources, 2008, Vol. 179, pp 739-744
Structural and electrical characterisation of lanthanum nickelate reactively sputter-deposited thin films
BRIOIS P., PERRY F., BILLARD A.
Thin solid films, 2008, Vol. 516, pp 3282-3286
Electrochemical study of cobalt nucleation mechanisms on different metallic substrates
SAHARI A., AZIZI A., FENINECHE N., SCHMERBER G., DINIA A.
Materials Chemistry and Physics, 2008, Vol. 108, pp 345-352
A three-dimensional model of the wire-arc spray process and its experimental validation
BOLOT R., PLANCHE M.P., LIAO H., CODDET C.
Journal of Materials Processing Technology, 2008, Vol. 200, pp 94-105
Structural -electrical-optical properties relationship of solium superionic conductor sputter-deposited coatings
HORWAT D., PIERSON J.F., BILLARD A.
Thin Solid Films, 2008, Vol. 516, pp 3387-3393
Performances of interferometric optical transmission diagnostic for in situ and real-time control of magnetron sputtering deposition process
PERRY F., BILLARD A., PIGEAT P.
Measurement, 2008, Vol. 41, pp 516-525
Effect of ball milling of feedstock powder on microstructure and properties of TiN particle-reinforced Al alloy based composites fabricated by cold spraying
LI W.Y., ZHANG G., ZHANG C., ELKEDIM O., LIAO H., CODDET C.
Journal of Thermal Spray Technology, 2008, Vol. 17, N° 3, pp 316-322
Structural and electrical characterisation of strontium zirconate proton conductor co-sputter deposited coatings
ARAB POUR YAZDI M., BRIOIS P., GEORGES S., LAPOSTOLLE F., BILLARD A.
Ionics, 2008, Vol. 14, pp 285-291
Effect of the internal stress relaxation during the post-annealing on the photo-induced properties of TiO2 coatings reactively sputtered
AUBRY E., DEMANGE V., BILLARD A.
Surface and Coatings Technology, 2008, Vol. 202, pp 6120-6126
Development of photocatalytic active TiO2 surfaces by thermal spraying of nanopowders
TOMA F.L., BERTRAND G., KLEIN D., MEUNIER C., BEGIN S.
Journal of Nanomaterials, 2008, Article ID 384171, 8 pages
Stabilization study of resistive thin films for AC resistors application
MORILHAT A., BOUNOUH A., LAPOSTOLLE F., BILLARD A., ZIADE F., LEPRAT D.
pp 114-115, CPEM Digest, Art. N° 4574679, 2008
Influence of RF bias on the deposition of CrN studied by OES
ZHANG Z., RAPAUD O., BONASSO N., MERCS D., DONG C., CODDET C.
Advanced Engineering Materials, 2008, Vol. 10, N° 7, pp 628-633
Influence of suspension characteristics on coatings microstructure obtained by suspension plasma spraying
RAMPON R., MARCHAND O., FILIATRE C., BERTRAND G.
Surface and Coatings Technology, 2008, Vol. 202, pp 4337-4342 .
Combining effects of ablation laser and laser preheating on metallic substrates before thermal spraying
DANLOS Y., COSTIL S., LIAO H., CODDET C.
Surface and Coatings Technology, 2008, Vol. 202, pp 4531-4537
In-flight particle characteristics control by implementing a fuzzy logic controller
KANTA A.F., MONTAVON G., PLANCHE M.P., CODDET C.
Surface and Coatings Technology, 2008, Vol. 202, pp 4479-4482
Surface modification of ceramic matrix composites induced by laser treatment
COSTIL S., LUKAT S., LANGLADE C., CODDET C.
Applied Surface Science, 2008, Vol. 255, pp 2425-2432
Synthesis and electrical properties of Ln2CuO4+8 (Ln:Nd or La) mixed conductor sputter deposited coatings
BRIOIS P., OLIVEIRA J.C., LAPOSTOLLE F., PERRY F., BILLARD A., CAVALEIRO A.
Ionics, 2008, Vol.14, pp 455-461
La9,33Si6O26 electrolyte thin films for IT-SOFC application deposited by HIPIMS/DC hybrid magnetron sputtering process
MA C.Y., BRIOIS P., BOHLMARK J., LAPOSTOLLE F., BILLARD A.
Ionics, 2008, Vol.14, pp 471-476
Mechanical properties of a-C:H/Si containing a-C;H multilayeres coatings grown by LF-PEVCD
CHOUQUET C., DUCROS C., BARRAT S., BILLARD A;, SANCHETTE F.
Surface and Coatings Technology, 2008, Vol. 203, pp 745-749
Microstructural and photocatalytic properties distribution of TiO2 coatings reactively sputtered as a function of the substrate position relatively to the Ti target
AUBRY E., MISKA P., GIGLEUX L., MEZIN A., DEMANGE V., BILLARD A.
Surface and Coatings Technology, 2008, Vol. 202, pp 4980-4985
Towards a thin film electrochromic device using NASICON electrolyte
HORWAT D., PIERSON J.F., BILLARD A.
Ionics, 2008, Vol.14, pp 227-233
Particles spreading phenomena in the case of glass thermal spraying
POIRIER T., PLANCHE M.P., LANDEMARRE O., CODDET C.
Journal of Thermal Spary Technology, 2008, Vol. 17, n°4, pp 564-573
Autres publications et Actes de colloques
Effect of feedstock powder characteristics on microstructure and mechanical properties of lanthanum silicate coatings deposited by atmospheric plasma spraying
GAO W., ZHANG C., LIAO H.L., LAPOSTOLLE F., CODDET C.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1441-1444
Gas-tight coatings produced by very low pressure plasma spraying
VERDY C., ZHANG C., SOLOLOV D., LIAO H., KLEIN D., CODDET C.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 398-402
Characterizations of cold-sprayed nickel-alumina composite coatingwith relatively large nickel-coated alumina powder
LI W.Y., LI J.L., ZHANG C., LIAO H., CODDET C.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 235-240
How long is the way to manufacture solid oxide fuel cells with suspension plasma spraying ?
MARCHAND O., RAMPON R., BERTRAND G., FILIATRE C.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 571-575
Study on gas permeation behaviour through atmospheric plasma-sprayed yttria stabilized zirconia coating
ZHANG C., LIAO H., PLANCHE M.P., CODDET C., LI C.X., YANG G.J., LI C.J.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 410-416
Numerical simulation of the thermo mechanical behaviour of thermally sprayed abradable coatings
SEICHEPINE J.L., FARAOUN H., PEYRAUT F., CHANDLER P., CODDET C., SPORER D., HERTTER M., SELLARS C.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1039-1043
Mechanical modelling of highly heterogeneous thermally sprayed abradable coatings
SEICHEPINE J.L., CODDET C., SPORER D., LOURTIE D.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1044-1047
Thermal fluxes transferred by HVOF jets produced by different guns
BOLOT R., LANDEMARRE O., CODDET C.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1374-1378
Cold spraying technique to process nanomagnetic coatings
CHERIGUI M., FENINECHE N., LIAO H., CODDET C., LI W., JI V.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1120-1125
Development of a low cost system for the cold spray process with helium
VERDY C., LIAO H., LANDEMARRE O., CODDET C.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1302-1305
Thermal conductivity of AlSi/Polyester abradable coatings
BOLOT R., SEICHEPINE J.L., VUCKO F., CODDET C., SPORER D., FIALA P., BARTLETT B.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1068-1070
Anode SOFC’s produced by suspension plasma spraying: Interests and prospects
MARCHAND O., RAMPON R., BERTRAND G.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1109-1113
Flame spray parameter optimization to manufacture glaze coatings onto thermally sensitive substrates
ARCONDEGUY A., MONTAVON G., DENOIRJEAN A., PATEYRON B., GRIMAUDE A., GASGNIER G., HUGUET C., PLANCHE M.P.
International Thermal Spray 2008 « Thermal Spray Crossing Borders, Ed. E. Lugscheider, Maastricht, The Netherlands, 2-4 june 2008, pp 1327-1332
Publications déposées en 2005 – 2007
Model based expert system for design and simulation of APS coatings
Journal of Thermal Spray Technology, 2007, Vol. 16, N° 1, pp 128-139
TRIFA F.I., MONTAVON G., CODDET C.
Modeling of an inductively coupled plasma for the synthesis of nanoparticles
Journal of Thermal Spray Technology, 2007, Vol. 16, N° 5-6, pp 690-697
BOLOT R., CODDET C., SCHREUDERS C., LEPAROUX M., SIEGMANN S.
Optimization of a rotating twin wire arc spray gun
Journal of Thermal Spray Technology, 2007, Vol. 16, N° 5-6, pp 783-790
BOLOT R., LIAO H., MATEUS C., CODDET C., BORDES J.M.
On the role of spraying process on microstructural, mechanical, and thermal response of alumina coatings
Journal of Thermal Spray Technology, 2007, Vol. 16, N° 5-6, pp 839-843
COSTIL S., VERDY C., BOLOT R., CODDET C.
Fuzzy logic analysis of alumina titania deposition yield during APS process
Journal of Thermal Spray Technology, 2007, Vol. 16, N° 5-6, pp 913-918
KANTA A.F., MONTAVON G., PLANCHE M.P., CODDET C.
Microstructure and electrical conductivity of atmospheric plasma sprayed LSM/YSZ composite cathode materials
Journal of Thermal Spray Technology, 2007, Vol. 16, N° 5-6, pp 1005-1010
ZHANG C., LI W.Y., LIAO H., LI C.J., LI C.X., CODDET C.
Modelling of magnetic proprieties of FeNb coatings produced by HVOF thermal spraying
Journal of applied sciences, 2007, Vol. 7, N° 3, pp 386-391
CHERIGUI M., HEBBAR A., FENINECHE N.E., CODDET C.
Investigations of apatite-structure coatings deposited by reactive magnetron sputtering dedicated to IT-SOFC
Plasma Processes and Polymers, 2007, Vol. 4, pp S99-S103
BRIOIS P., LAPOSTOLLE F., BILLARD A.
Influence of Cr and Si addition on structural and mechanical properties of TiAlN coatings reactively sputter deposited
Plasma Process and Polymers, 2007, Vol. 4, pp S1-S6
DEHLINGER A.S., LAPOSTOLLE F., LAMY S., RAPAUD O., MEUNIER C., BRIEN V., KLEIN D., CODDET C.
Oxidation control in atmospheric plasma spraying coating
Surface and coatings technology, 2007, Vol. 202, pp 69-76
PLANCHE M.P., LIAO H., CODDET C.
Structural and mechanical properties of (Al, Cr)N and (Al, Cr)SiN coatings reactively sputter deposited
Plasma Processes and Polymer, 2007, Vol. 4, pp S677-S680
BRIOIS P., MERCS D., BANAKH O., LAMY S., STEINMANN P.A., CODDET C.
Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powder
Materials and Design, 2007, Vol. 28, pp 2129-2137
LI W.Y., LIAO H., DOUCHY G., CODDET C.
Microstructure, microhardness and dry friction behavior of cold sprayed tin bronze coatings
Applied Surface Science, 2007, Vol. 254, pp 1482-1488
GUO X., ZHANG G., LI W.Y., DEMBINSKI L., GAO Y., LIAO H., CODDET C.
Characterizations of cold sprayed TiN particle reinforced Al alloy based composites – from structures to tribological behaviour
Advanced Engineering Materials, 2007, Vol. 9, N° 7, pp 577- 583
LI W.Y., ZHANG G., GUO X., LIAO H., CODDET C.
Ti and Ti-6Al-4V coatings by cold spraying and microstructure modification by heat treatment
Advanced Engineering Materials, 2007, Vol. 9, N° 5, pp 418-423
LI W.Y., ZHANG C., GUO X., XU J., LI C.J., LIAO H., CODDET C., KHOR K.A.
Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying
Applied Surface Science, 2007, Vol. 254, pp 517-526
LI W.Y., ZHANG C., GUO W., LI C.J., LIAO H., CODDET C.
Structures and tribological performances of PEEK (poly-ether-ether-ketone)-based coatings designed for tribological application
Progress in Organic Coatings, 2007, Vol. 60, pp 39-44
ZHANG G., LI W.Y., CHERIGUI M., ZHANG C., LIAO H., BORDES J.M., CODDET C.
Deposition characteristics of Al-12Si alloy coatings fabricated by cold spraying with relatively large powder particles
Applied Surface Science, 2007, Vol. 253, pp 7124-7130
LI W.Y., ZHANG C., GUO X.P., ZHANG G., LIAO H.L., CODDET C.
High energy ball milling of Al2O3-TiO2 powders
Journal of Alloys and Compounds, 2007, Vol. 434-435, pp 489-492
COSTE S., BERTRAND G., CODDET C., GAFFET E., HAHN H., SIEGER H.
Influence of the addition of silicon on the structure and properties of chromium nitride coatings deposited by reactive magnetron sputtering assisted by RF plasmas
Surface and coatings technology, 2007, Vol. 201, pp 6970-6976
MERCS D., BRIOIS P., DEMANGE V., LAMY S., CODDET C.
Effect of heat treatment on the microstructure and microhardness of cold sprayed tin bronze coating
Applied Surface Science, 2007, Vol. 253, pp 5967-5971
LI W.Y., LI C.J., LIAO H., CODDET C.
Ab initio calculations of structural and electronic properties of Y2Ti2O7 and Cd2Nb2O7
Physica B, 2007, Vol. 392, pp 341-347
TERKI R., BERTRAND G., AOURAG H., CODDET C.
Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying
Applied Surface Science, 2007, Vol. 253, pp 5084-5091
LI W.Y., LIAO H., LI C.J., BANG H.S., CODDET C.
Ionic conductivity and its temperature dependence of atmospheric plasma sprayed yttria stabilize zirconia electrolyte
Materials Science and Engineering B, 2007, Vol. 137, pp 24-30
ZHANG C., LI C.J., ZHANG G., NING X.J., LI C.X., LIAO H., CODDET C.
Effect of crystalline structure on the hardness and interfacial adherence of flame sprayed poly(ether-ether-ketone) coatings
European Polymer Journal, 2007, Vol. 43, pp 1077-1082
ZHANG G., LIAO H., CHERIGUI M., PAULO DAVIM J., CODDET C.
Structural investigations of YSZ coatings prepared by DC magnetron sputtering
Surface and coatings technology, 2007, Vol. 201, pp 6012-6018
BRIOIS P., LAPOSTOLLE F., DEMANGE V., DJURADO E., BILLARD A.
Plasma spray process on line control by artificial intelligence methodology
Advanced Engineering Materials, 2007, Vol. 9, N° 1-2, pp 105-113
KANTA A.F., MONTAVON G., PLANCHE M.P., CODDET C.
Significant influences of metal reactivity and oxide films at particle surfaces on coating microstructure in cold spraying
Applied surface science, 2007, Vol. 253, pp 3557-3562
LI W.Y., ZHANG C., WANG H.T., GUO X.P., LIAO H., LI C.J., CODDET C.
Microstructure and magnetic properties of Fe-Si based coatings produced by HVOF thermal spraying process
Journal of alloys and compounds, 2007, Vol. 427, pp 281-290
CHERIGUI M., FENINECHE N.E., JI G., GROSDIDIER T., CODDET C.
Magnetron sputtering of NASICON (Na3Zr2Si2PO12) thin films Part 1: Limitations of the classical methods
Surface and coatings technology, 2007, Vol. 201, pp 7013-7017
HORWAT D., PIERSON J.F., BILLARD A.
Corrosion behavior of cold sprayed titanium protective coating on 1Cr13 substrate in seawater
Surface and Coatings Technology, 2007, Vol. 201, pp 5203-5206
WANG H.R., LI W.Y., MA L., WANG J., WANG Q.
Structure mechanical properties relationship of co-sputter deposited iron magnesium coatings
Surface and coatings technology, 2007, Vol. 201, pp 7007-7012
BOUAZIZ O., BILLARD A.
Magnetron sputtering of NASICON (Na3Zr2Si2PO12) thin films Part II: A novel approach
Surface and coatings technology, 2007, Vol. 201, pp 7060-7065
HORWAT D., PIERSON J.F., BILLARD A.
Effect of O2 gas partial pressure on structures and dielectric characteristics of rf sputtered ZrO2 thin films
Applied surface science, 2007, Vol. 253, pp 8718-8724
MA C.Y., LAPOSTOLLE F., BRIOIS P., ZHANG Q.Y.
Pulsed laser growth and characterization of thin films on titanium substrates
Applied Surface Science, 2007, Vol. 253, pp 8226-8230
LAVISSE L., JOUVARD J.M., IMHOFF L., HEINTZ O., KORNTHEUER J., LANGLADE C., BOURGEOIS S., MARCO DE LUCAS M.C.
Corrosion behaviour of dc magnetron sputtered Fe1-xMgx alloy films in 3wt% NaCl solution
Corrosion Science, 2007, Vol. 49, pp 4276-4295
BERZIOU C., REMY K., BILLARD A., CREUS J.
Poisoning prevention of TiO2 photocatalyst coatings sputtered on soda-lime glass by intercalation of SiNx diffusion barriers
Surface and Coatings Technology, 2007, Vol. 201, pp 7706-7712
AUBRY E., GHAZZAL M.N., DEMANGE V., CHAOUI N., ROBERT D., BILLARD A.
Effect of different incidence angles on bonding performance in cold spraying
Trans. Nonferrous Metal Society Chine, 2007, Vol. 17, pp 116-121
LI G., WANG X.F., LI W.Y.
A material independent algorithm for preserving of the orientation of the spatial basis attached to deforming medium
Computational Mechanics, 2007, Vol. 40, N° 6, pp 1053-1060
PEYRAUT F., FENG Z.Q., LABED N.
SrZrl-xYxO3 coatings elaborated by DC magnetron sputtering
ARAB POUR YAZDI M., BRIOIS P., LAPOSTOLLE F., BILLARD A.
ECS Transactions, 2007, Vol. 7, n°1, pp 2313-2319
Synthesis of lanthanum silicates electrolyte for intermediate temperature SOFC
ECS Transactions, 2007, Vol. 7, N° 1, pp 2351-2355
GAO W., ZHANG C., LAPOSTOLLE F., LIAO H., JI V., CODDET C.
Transient thermal analysis and coating formation simulation of thermal spray process by finite difference method
Surface and Coatings Technology, 2006, Vol. 200, pp 4665-4673
ZHU Y., LIAO H., CODDET C.
Aluminum protective coatings – fatigue and bond strength properties with respect to surface preparation techniques: laser ablation, shot peening and grit blasting
Canadian Metallurgical Quarterly, 2006, Vol. 45, N° 1, pp 49-57
ARSENAULT B., GOUGEON P., VERDIER M., DU QUESNAY D.L.
Evaluation of metastable phase and microhardness on plasma sprayed Titania coatings
Surface and Coatings Technology, 2006, Vol. 200, pp 5013-5019
BERTRAND G., BERGER-KELLER N., MEUNIER C., CODDET C.
Phase composition and stability of Nanostructured 4,7 wt.% yttria stabilized zirconia coatings deposited by atmospheric plasma spraying
Surface and Coatings Technology, 2006, Vol. 200, pp 4549-4556
LIANG B., DING C., LIAO H., CODDET C.
Investigation of friction and wear behaviour of SiC filled PEEK coating using artificial neural network
Surface and Coatings Technology, 2006, Vol. 200, pp 2610-2617
ZHANG G., GUESSASMA S., LIAO H., CODDET C., BORDES J.M.
Microstructure and photocatalytic properties of Nanostructured TiO2 and TiO2-Al coatings elaborated by HVOF spraying for the nitrogen oxides removal
Materials Science and Engineering A, 2006, Vol. 417, pp 56-62
TOMA F.L., BERTRAND G., CHWA S.O., KLEIN D., LIAO H., MEUNIER C., CODDET C.
On dry sliding friction and wear behaviour of PEEK and PEEK/SiC composite coatings
Wear, 2006, Vol. 260, pp 594-600
ZHANG G., LIAO H., LI H., MATEUS C., BORDES J.M., CODDET C.
Comparative behavior of vacancy and C, B, N, O atoms single defect on hardening the B2-FeAl structure: An atomistic study
Intermetallics, 2006, Vol. 14, pp 142-148
KELLOU A., GROSDIDIER T., AOURAG H.
Temperature dependence of microstructure and hardness of vacuum plasma sprayed Cu-Mo composite coatings
Surface and Coatings Technology, 2006, Vol. 200, pp 5682-5686
CHWA S.O., KLEIN D., LIAO H., DEMBINSKI L., CODDET C.
Study of stability of twist grain boundaries in hcp zinc
Scripta Materialia, 2006, Vol. 54, pp 865-868
FARAOUN H., VINCENT G., ESLING C., AOURAG H.
Nozzle developments for thermal spraying at very low pressure
Journal of thermal spray technology, 2006, Vol. 15, N° 4, pp 827-833
BOLOT R., SOKOLOV D., KLEIN D., CODDET C.
Paramagnetic susceptibility of ferrite and cementite obtained from ab initio calculations
Journal of Magnetism and magnetic materials, 2006, Vol. 299, pp 64-69
ZHANG Y.D., FARAOUN H., ESLING C., ZUO l., AOURAG H.
Role of the laser surface preparation on the adhesion of Ni-5%Al coatings deposited using the PROTAL process
Journal of Thermal Spray Technology, 2006, Vol. 15, N° 2, pp 191-197
LI H., COSTIL S., LIAO H.L., CODDET C.
Effect of annealing treatment on the microstructure and properties of cold sprayed Cu coating
Journal of Thermal Spray Technology, 2006, Vol. 15, N° 2, pp 206-211
LI W.Y., LI C.J., LIAO H.L.
Microstructure and environmental functionalities of TiO2 supported photocatalysts obtained by suspension plasma spraying
Applied Catalysis B: Environmental, 2006, Vol. 68, pp 74-84
TOMA F.L., BERTRAND G., BEGIN S., MEUNIER C., BARRES O., KLEIN D., CODDET C.
Comparative study on the photocatalytic decomposition of nitrogen oxides using TiO2 coatings prepared by conventional plasmaspraying and suspension plasma spraying
Surface and Coatings Technology, 2006, Vol. 200, pp 5855-5862
TOMA F.L., BERTRAND G., CHWA S.O., MEUNIER C., KLEIN D., CODDET C.
The 3é hyperelastic model applied to the Modeling of 3D impact problems
Finite elements in analysis and Design, 2006, Vol. 43, pp 51-58
FENG Z.Q., VALLEE C., FORTUNE D., PEYRAUT F.
Surface modifications induced by nanosecond pulsed Nd:YAG laser irradiation of metallic substrates
Surface and Coatings Technology, 2006, Vol. 201, pp 1383-1392
LI H., COSTIL S., BARNIER V., OLTRA R., HEINTZ O., CODDET C.
Effects of surface conditions on the flattening behavior of plasma sprayed Cu splats
Surface and Coatings Technology, 2006, Vol. 200, pp 5435-5446
LI H., COSTIL S., LIAO H., LI C.J., PLANCHE M., CODDET C.
Neural computation analysis of alumina-titania wears resistance coating
International Journal of Refractory Metals and Hard Materials, 2006, Vol. 24, pp 240-246
GUESSASMA S., BOUNAZEF M., NARDIN P.
Magnetic properties of HVOF thermally sprayed coatings obtained from Nanostructured powders
Surface and Coatings Technology, 2006, Vol. 201, pp 1805-1813
CHERIGUI M., FENINECHE N.E., GUPTA A., ZHANG G., CODDET C.
Wear behavior of alumina Titania coatings: analysis of process and parameters
Ceramics International, 2006, Vol. 32, pp 13-19
GUESSASMA S., BOUNAZEF M., NARDIN P., SAHRAOUI T.
Deposition of PEEK coatings using a combined flame spraying–laser remelting process
Surface and Coatings Technology, 2006, Vol. 201, pp 243-249
ZHANG G., LIAO H., YU H., COSTIL S., MHAISALKAR S.G., BORDES J.M., CODDET C.
Examination of the critical velocity for deposition of particles in cold spraying
Journal of Thermal Spray Technology, 2006, Vol. 15, N° 2, pp 212-222
LI C.J., LI W.Y., LIAO H.
Improvement of thermally sprayed abradable coating by microstructure control
Surface and coatings Technology, 2006, Vol. 201, pp 2303-2312
FARAOUN H.I., GROSDIDIER T., SEICHEPINE J.L., GORAN D., AOURAG H., CODDET C., ZWICK J., HOPKINS N.
Finite deformations of Ogden’s materials under impact loading
International Journal of Non Linear Mechanics, 2006, Vol. 41, pp 575-585
FENG Z.Q., PEYRAUT F., HE Q.C.
Modelling route for abradable coatings
Surface and Coatings Technology, 2006, Vol. 200, pp 6578-6582
FARAOUN H.I., SEICHEPINE J.L., CODDET C., AOURAG H., ZWICK J., HOPKINS N., SPORER D., HERTTER M.
Microwave sintering of poly-ether-ether-ketone (PEEK) based coatings deposited on metallic substrate
Scripta Materialia, 2006, Vol. 55, pp 621-624
ZHANG G., LEPAROUX S., LIAO H., CODDET C.
Application of optical transmission interferometry for in-situ structural investigations of titanium dioxide sputter-deposited coatings
Surface and Coatings Technology, 2006, Vol. 201, pp 2633-2638
LAPOSTOLLE F., PERRY F., BILLARD A.
Structural and electronic properties of zirconia phases: FP-LAPW investigations
Materials science in semiconductor processing, 2006, Vol. 9, pp 1006-1013
TERKI R., BERTRAND G., AOURAG H., CODDET C.
Characterization of atmospheric plasma-sprayed Sc2O3–ZrO2 electrolyte coating
Solid State Ionics, 2006, Vol. 177, pp 2149-2153
LI C.X., LI C.J., LONG H.G., XING Y.Z., NING X.J., ZHANG C., LIAO H., CODDET C.
Improvement of microstructure and property of cold-sprayed Cu–4 at.%Cr–2 at.%Nb alloy by heat treatment
Scripta Materialia, 2006, Vol. 55, pp 327-330
LI W.Y., GUO X.P., VERDY C., DEMBINSKI L., LIAO H.L., CODDET C.
Correlation of crystallization behavior and mechanical properties of thermal sprayed PEEK coating
Surface and Coatings Technology, 2006, Vol. 200, pp 6690-6695
ZHANG G., LIAO H., YU H., JI V., HUANG W., MHAISALKAR S.G., CODDET C.
On the use of auxiliary systems during thermal spraying
Surface and Coatings Technology, 2006, Vol. 201, pp 1969-1974
CODDET C.
Influence of reflected radiation of high velocity oxy-fuel spraying torch on long wavelength IR pyrometry temperature measurement
Infrared Physics and Technology, 2006, Vol. 48, pp 83-88
MOULLA L., SALHI Z., PLANCHE M.P., CODDET C.
Modification of thermal barrier coating architecture by in situ laser remelting
Journal of the European Ceramic Society, 2006, Vol. 26, pp 3583-3597
ANTOU G., MONTAVON G., HLAWKA F., CORNET A., CODDET C., MACHI F.
Ceramic/fluoropolymer composite coatings by plasma spraying
Surface and Coatings Technology, 2006, Vol. 201, pp 2020-2027
COSTIL S., MATEUS C., CODDET C.
Effect of vacuum heat treatment on microstructure and microhardness of cold sprayed Cu-4Cr-2Nb alloy coating
Transactions of nonferrous metals Society of China, 2006, Vol. 16, pp s203-s208
LI W.Y., GUI X.P., DEMBINSKI L., LIAO H., CODDET C.
Predicting spray processing parameters from required coating structural attributes by artificial intelligence
Advanced Engineering Materials, 2006, Vol. 8, N° 7, pp 628-635
KANTA A.F., MONTAVON G., CODDET C.
Optimal design of a convergent barrel cold spray nozzle by numerical method
Applied Surface Science, 2006, Vol. 253, pp 708-713
LI W.Y., LIAO H., WANG H.T., LI C.J., ZHANG G., CODDET C.
Synthesis of bulk FeAl Nanostructured materials by HVOF spray forming and Spark Plasma Sintering
Intermetallics, 2006, Vol. 14, pp 1208-1213
GROSDIDIER T., JI G., BERNARD F., GAFFET E., MUNIR Z.A., LAUNOIS S.
Kinetics of the crystallization of icosahedral phase in ultra thin deposits of Al62Cu25,5Fe12,5 alloy
Philosophical magazine, 2006, Vol. 86, N° 3-5, pp 275-280
BONASSO N., PIGEAT P.
Structural evolution and mechanical properties modification of MELTPRO (in situ remelted) processed thermal barrier coatings during thermal shock
Advanced engineering materials, 2006, Vol. 8, N° 7, pp 657-663
ANTOU G., MONTAVON G., HLAWKA F., CODDET C., CORNET A.
Liquid plasma sprayed coatings of yttria stabilized zirconia for SOFC electrolytes
Journal of Thermal Spray Technology, 2006, Vol. 15, N° 4, pp 682-688
RAMPON R., BERTRAND G., TOMA F.L., CODDET
Nanostructured photocatalytic Titania coatings elaborated by suspension plasma spraying
Journal of Thermal Spray Technology, 2006, Vol. 15, N° 4, pp 587-592
TOMA F.L., BERTRAND G., LAMY S., KLEIN D., CODDET C., MEUNIER C.
Comparison of the photocatalytic behavior of TiO2 coatings elaborated by different thermal spraying processes
Journal of Thermal Spray Technology, 2006, Vol. 15, N° 4, pp 576-581
TOMA F.L., SOKOLOV D., BERTRAND G., KLEIN D., CODDET C., MEUNIER C.
Characterization of YSZ SOFC electrolyte deposited by atmospheric plasma spraying and low pressure plasma spraying
Journal of Thermal Spray Technology, 2006, Vol. 15, N° 4, pp 598-603
ZHANG C., LIAO H., LI W.Y., CODDET C., LI C.J., LI C.X., NING X.J.
On high velocity impact of micro-sized metallic particles in cold sparying
Applied surface Science, 2006, Vol. 253, pp2852-2862
LI W.Y., LIAO H., LI C.J., LI G., CODDET C., WANG X.
Exploring thermal spray gray alumina coating pore network architecture by combining stereological protocols and impedance electrochemical spectroscopy
ANTOU G., MONTAVON G., HLAWKA F., CORNET A., CODDET C.
Journal of Thermal Spray Technology, 2006, Vol. 15, N° 4, pp 765-772
Mesure de l’évolution des contraintes en temps réel au cours du dépôt d’un revêtement par projection thermique
LIAO H., VASLIN P., YANG Y., NORMAND B., CODDET C.
Traitement thermique, 1996, Vol. 290, pp 33-39
Image-based model for wear-protective abradable coating
FARAOUN H.I., SEICHEPINE J.L., GROSDIDIER T., CODDET C., AOURAG H.
Algerian Journal of Advanced Materials, 2006, Vol. 3, pp 233-237
Magnetic HVOF thermally sprayed coatings
CHERIGUI M., FENINECHE N.E., GROSDIDIER T., AOURAG H., CODDET C.
Algerian Journal of Advanced Materials, 2006, Vol. 3, pp 51-54
On high velocity impact of micro-sized metallic particles in cold spraying
LI W.Y., LIAO H., LI C.J., LI G., CODDET C., WANG X.
Applied Surface Science, 2006, Vol. 253, pp 2852-2862
Environmental applications of the reactive titania coatings elaborated by suspension plasma spraying
TOMA F.L., BERTRAND G., MEUNIER C., BEGIN S., KLEIN D., CODDET C.
Advances in science and technology, 2006, Vol. 45, pp 2182-2187
Mossbauer and X-ray diffraction characterization of Fe60Al40 coatings prepared by thermal spraying
CORDIER-ROBERT C., GROSDIDIER T., JI G., FOCT J.
Hyperfine Interact, 2006, Vol. 168, pp 951-957
Microstructural and mechanical characterization of mechanically-actived plasma-sprayed nanostructured Al2O3-TiO2 and Al2O3-ZeO2 coatings
COSTE S., BERTRAND G., CODDET C., GAFFET E., HAHN H., SIEGER H., MEUNIER C., VIVES S.
Advances in Science and technology, 2006, Vol. 45, pp.1224-1229
Microstructural transformations of Al2O3-TiO2 and Al2O3-ZeO2 powders i nduced by high-energy ball-milling
COSTE S., BERTRAND G., CODDET C., GAFFET E., HAHN H., SIEGER H., MEUNIER C., RODRIGUEZ M.A.,VIVES S.
Advances in Science and technology, 2006, Vol. 45, pp. 303-308
Experimental determination of the relationship between flattening degree and Reynolds number for spray molten droplets
Surface and Coatings Technology, 2005, Vol. 191, pp 375– 383
LI C.J., LIAO H.L., GOUGEON P., MONTAVON G., CODDET
Structural study of iron-based microstructured and nanostructured powders sprayed by HVOF thermal spraying
Surface and Coatings Technology, 2005, Vol. 192, pp 19-26
CHERIGUI M., FENINECHE N.E., CODDET C.
Deposition and corrosion resistance of HVOF sprayed nanocrystalline iron aluminide coatings
Surface and Coatings Technology, 2005, Vol. 190, pp 406– 416
JI G., EL KEDIM O., GROSDIDIER T.
Ceramic/fluoropolymer composite coatings by thermal spraying—a modification of surface properties
Surface and Coatings Technology, 2005, Vol. 191, pp 108–118
MATEUS C., COSTIL S., BOLOT R., CODDET C.
FeSi HVOF thermal spray coatings: diagnostic, microstructure, and magnetic properties
Materials Letters, 2005, Vol. 59, pp 463– 467
CHERIGUI M., SALHI Z.., FENINECHE N.E., GOUGEON P., CODDET C.
FeNb magnetic properties correlated to microstructure features
Materials Science and Engineering B, 2005, Vol. 116, pp 40–46
CHERIGUI M., GUESSASMA S., FENINECHE N., CODDET C.
Spray-dried ceramic powders:Aquantitative correlation between slurry characteristics and shapes of the granules
Chemical Engineering Science, 2005, Vol. 60, pp 95 – 102
BERTRAND G., ROY P., FILIATRE C., CODDET C.
Spray forming thick nanostructured and microstructured FeAl deposits
Intermetallics, 2005, Vol. 13, pp 596-607
JI G., GROSDIDIER T., LIAO H., MORNIROLI J.P., CODDET C.
Influence of reflected atmospheric plasma spraying torch radiations on long wavelength IR radiometry temperature measurement
Infrared Physics and Technology, 2005, Vol. 46, pp 364-369
MOULLA L., GOUGEON P., CODDET C.
Development of coating by thermal plasma spraying under very low-pressure condition +1 mbar
Vacuum, 2005, Vol. 77, pp 145–150
SALHI Z., KLEIN D., GOUGEON P., CODDET C.
Influence of plasma light scattered by in-flight particle on the measured temperature by high speed pyrometry
Infrared Physics and Technology, 2005, Vol. 46, pp 394-399
SALHI Z., GOUGEON P., KLEIN D., CODDET C.
Deoxidisation and phase analysis of plasma sprayed TiO2 by X-ray Rietveld method
Thin Solid Films, 2005, Vol. 473, pp 177– 184
WANG X.Y., LIU Z., LIAO H., KLEIN D., CODDET C.
Microstructure and mechanical properties of plasma sprayed nanostructured TiO2–Al composite coatings
Surface and Coatings Technology, 2005, Vol. 194, pp 215– 224
CHWA S.O., KLEIN D., TOMA F.L., BERTRAND G., LIAO H., CODDET C., OHMORI A.
Theoretical study of structural, electronic, and thermal properties of Cr2(Zr,Nb) Laves alloys
Acta Materialia, 2005, Vol. 53, pp 1459–1466
KELLOU A., GROSDIDIER T., CODDET C., AOURAG H.
Geometrical features of plasma sprayed deposits and their characterization methods
Materials Characterization, 2005, Vol. 54, pp 157-175
TRIFA F.I., MONTAVON G., CODDET C., NARDIN P., ABRUDEANU M.
Influence of surface laser cleaning combined with substrate preheating on the splat morphology
Journal of Thermal Spray Technology, 2005, Vol. 14, N° 1, pp 31-38
COSTIL S., LIAO H., GOMMOUDI A., CODDET C.
On the relationship between the geometric processing parameters of APS and the Al2O3-TiO2 deposit shapes
Surface and Coatings Technology, 2005, Vol. 195, pp 54-69
TRIFA F.I., MONTAVON G., CODDET C.
Diagnostic of YSZ in-flight particle characteristics under low pressure VPS conditions
Aerospace Science and Technology, 2005, Vol. 9, pp 203-209
SALHI Z., GUESSASMA S., GOUGEON P., KLEIN D., CODDET C.
Neural computation to correlate HVOF thermal spraying parameters with the magnetic properties of FeNb alloy deposits
Materials Chemistry and Physics, 2005, Vol. 93, pp 181–186
CHERIGUI M., GUESSASMA S., FENINECHE N., CODDET C.
Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process
Materials Chemistry and Physics, 2005, Vol. 92, pp 419–423
CHERIGUI M., GUESSASMA S., FENINECHE N., HAMZAOUI R., EL-KEDIM O., CODDET C.
Effect of milling conditions on structure and magnetic properties of nanocrystalline cobalt
Materials Science and Engineering B, 2005, Vol. 119, pp 65–70
FENINECHE N., GUESSASMA S., ABDELBAKI N.
Neural computation applied to APS spray process: Porosity analysis
Surface and Coatings Technology, 2005, Vol. 197, pp 85 – 92
GUESSASMA S., CODDET C.
Neural computation to predict magnetic properties of mechanically alloyed Fe–10%Ni and Fe–20%Ni nanocrystalline
Materials Science and Engineering B, 2005, Vol. 119, pp 164–170
HAMZAOUI R., GUESSASMA S., ELKEDIM O., GAFFET E.
Ab initio study of the stability of X (X=Cr, Nb, Ag) ultra-thin layers on Cu(001)
Thin Solid Films, 2005, Vol. 489, pp 344 – 349
KELLOU A., GROSDIDIER T., TADJER A., CODDET C., AOURAG H.
Thermal and mechanical properties of partially stabilized zirconia manufactured by hybrid plasma spray process, High Temperature
Material Processes, 2005, Vol. 9, N° 1, pp. 109-125
ANTOU G., MONTAVON G.,HLAWKA F. , BOLOT R. , CORNET A.,CODDET C., MACHI F.
Mechanical and tribological properties of Cr–N and Cr–SI–N coatings reactively sputter deposited
Surface and Coatings Technology, 2005, Vol. 200, pp 403-407
MERCS D., BONASSO N., NAAMANE S., BORDES J.M., CODDET C.
Spray drying and sintering of zirconia based hollow powders
Powder Technology, 2005, Vol. 157, pp 20-26
ROY G., BERTRAND G., CODDET C.
Nanostructured zirconia–30 vol.% alumina composite coatings deposited by atmospheric plasma spraying
Thin Solid Films, 2005, Vol. 484, pp 225-231
LIANG B., LIAO H., DING C., CODDET C.
Influence of silicon addition on the oxidation resistance of CrN coatings
Surface and Coatings Technology, 2005, Vol. 200, pp 264– 268
THOBOR-KECK A., LAPOSTOLLE F., DEHLINGER A.S., PILLOUD D., PIERSON J.F., CODDET C.
Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments
Journal of Materials Processing Technology, 2005, Vol. 160, pp 34–42
LI J.F., LIAO H.L., DING C.X., CODDET C.
Microstructures of partially stabilized zirconia manufactured via hybrid plasma spray process
Ceramics International, 2005, Vol. 31, pp 611–619
ANTOU G., MONTAVON G., HLAWKA F., CORNET A., CODDET C.
Optimal design of a novel cold spray gun nozzle at a limited space
Journal of Thermal Spray Technology, 2005, Vol. 14, N° 3, pp 391-396
LI W.Y., LI C.J.
Elastic properties of binary NiAl, NiCr and AlCr and ternary Ni2AlCr alloys from molecular dynamic and Abinitio simulation
Computational Materials Science, 2005, Vol. 33, pp 184–191
FARAOUN H., AOURAG H., ESLING C., SEICHEPINE J.L., CODDET C.
Relationships between NiCrBSi particle characteristics and corresponding coating properties using different thermal spraying processes
Surface and Coatings Technology, 2005, Vol. 200, pp 2465– 2473
PLANCHE M.P., LIAO H., NORMAND B., CODDET C.
Size distribution of particles from individual wires and the effects of nozzle geometry in twin wire arc spraying
Surface and Coatings Technology, 2005, Vol. 200, pp 2123– 2130
LIAO H.L., ZHU Y.L., BOLOT R., CODDET C., MA S.N.
Grain boundary character and pinning effect during grain growth of two phase alloys
Solid State Phenomena, 2005, Vol. 105, pp 163-168
GUESSASMA S., ROUAG N.
Combination of inverse and neural network methods to estimate heat flux
Numerical Heat Transfer, Part A, 2005, Vol. 47, pp 593-607
HAO D., GUESSASMA S., MONTAVON G., LIAO H., CODDET C., BENKRID D., ABOUDDI S.
In situ control of AlCuFe thin film crystallization using optical pyrometry
Thin Solid Films, 2005, Vol. 485, pp 8-15
BONASSO N., PETITOT C., ROUXEL D., PIGEAT P.
Icosahedral Al62Cu25,5Fe12,5 phase in the presence of carbon
Materials Science and Engineering A , 2005, Vol. 390, pp 166–170
BONASSO N., ROUXEL D., PIGEAT P.
An analytical approach based on neural computation to estimate the lifetime of deep submicron MOSFETs
Semiconductor Science and Technolology, 2005, Vol. 20, pp 158-164
DJEFFAL F., GUESSASMA S., BENHAYA A., CHAHDI M.
A two dimensional heat transfer model for thermal barrier coating average thermal conductivity computation
Numerical Heat Transfer, Part A, 2005, Vol. 47, pp 875-898
BOLOT R., ANTOU G., MONTAVON G., CODDET C.
Neural computation to estimate heat flux in an atmospheric plasma spray process
Heat Transfer Engineering, 2005, Vol. 26, N° 10, pp 65-72
GUESSASMA S., HAO D., MOULLA L., LIAO H., CODDET C.
Autres publications et Actes de colloques
Combining effects of ablation laser and laser preheating on metallic substrate before thermal spraying
Les troisièmes rencontres internationales sur la projection thermique, Lille, 6 et 7 décembre 2007
DANLOS Y., COSTIL S., LIAO H., CODDET C.
Influence of suspension characteristics on coatings microstructure obtained by suspension plasma spraying
Les troisièmes rencontres internationales sur la projection thermique, Lille, 6 et 7 décembre 2007
RAMPON R., MARCHAND O., FILIATRE C., BERTRAND G.
In flight particle characteristics control by implementing a fuzzy logic controller
Les troisièmes rencontres internationales sur la projection thermique, Lille, 6 et 7 décembre 2007
KANTA A.F., MONTAVON G., PLANCHE M.P., CODDET C.
Examination of the estimating approaches for the critical velocity in cold spraying
pp 128-134, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
LI C.J., YANG G.J., LI C.X., BANG H.S., BANG H.S., LI. W.Y.
Modeling of an inductively coupled plasma for the synthesis of nanoparticles
pp 179-184, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
BOLOT R., CODDET C., SCHREUDERS C., LEPAROUX M., SIEGMANN S.
Influence of laser induced surface topography on the surface static wettability in PROTAL
pp 1070-1074, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
LI H., DANLOS Y., COSTIL S., CODDET C.
Microstructure and electrical conductivity of atmospheric plasma sprayed LSM-YSZ composite cathode coating
pp 1064-1069, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
ZHANG C., LI W.Y., LIAO H., CODDET C., LI C.J., LI C.X.
Modeling and experimental study of the high presure gas atomization of liquid metals
pp 1041-1046, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
ALLIMANT A., PLANCHE M.P., DEMBINSKI L., CODDET C.
Characterization of coating sprayed with AMT200 HVOF system
pp 965-970, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
ZHANG G., LIAO H., CODDET C., MALAVOLTA C., HANSZ B., KELLER S.
Influence of oxidation phenomenon on tribological behaviour of plasma spray coating
pp 922-926, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
STIHLE A., LIAO H., PLANCHE M.P., CODDET C., KENZARI S.
Fuzzy logic analysis of alumina titania deposition yield during APS process
pp 792-797, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
KANTA A.F., MONTAVON G., PLANCHE M.P., CODDET C.
Synthesis of lanthanum silicates with apatite type structure by atmospheric plasma spraying
pp 756-759, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
GAO W., ZHANG C., LAPOSTOLLE F., LIAO H., CODDET C., JI V.
Effect of in flight particle velocity on the performance of APS YSE electrolyte
pp 711-716, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
ZHANG C., LI C.J., LI C.X., GAO W., PLANCHE M., LIAO H., CODDET C.
Repeatability of measuring method for HVOF application
pp 600-603, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
MALAVOLTA C., LIAO H., ZHANG G., CODDET C., KELLER S., HANSZ B.
On the role of spraying process on microstructural, mechanical and thermal response of alumina coatings
pp 533-537, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
COSTIL S., VERDY C., BOLOT R., CODDET C.
Optimization of a rotating twin wire arc spray gun
pp 347-352, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
BOLOT R., LIAO H., MATEUS C., CODDET C., BORDES J.M.
Study of aluminium oxidation induced by a Q-switched Nd:YAG laser treatment and its influence on the adhesion properties of a plasma sprayed alumina coating
pp 335-340, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
BARNIER V., COSTIL S., LI H., CODDET C., OLTRA R.
Modeling on deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying
pp 248-253, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
LI W.Y., LIAO H., CODDET C., LI C.J., BANG H.S.
Modeling of the in flight particles characteristics using neural networks and analytical model
pp 173-178, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
KANTA A.F., PLANCHE M.P., MONTAVON G., CODDET C.
Deposition characteristics of Al-12Si alloy coating fabricated by cold spraying with relatively large powder particles
pp 78-84, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
LI W.Y., ZHANG C., GUO X.P., LIAO H.L., CODDET C.
Impact fusion of particle interfaces in cold spraying and its effect on coating microstructure
pp 60-65, Thermal spray 2007: Global coating solutions, Eds. B.R.Marple, M.M. Hyland, Y.C. Lau, R.S. Lima and G. Montavon, Pub. by ASM International, Materials Park, OH, USA
LI W.Y., ZHANG C., GUO X.P., DEMBINSKI L., LIAO H., CODDET C., LI C.J.
Modélisation de revêtements abradables pour l’industrie aéronautique
pp 199-205, 8e collogue national en calcul des structures, 21-25 Mai 2007, Giens, France
PEYRAUT F., SEICHEPINE J.L., FARAOUN H.I., HERTTER M., SPORER D., HOPKINS N., CODDET C.
YSZ sputter deposited coatings as dense supported electrolyte for electrochemical catalysts
OREPOC, Octobre 2007, pp 69-72
BILLARD A., CODDET P., KAROUM R., VERNOUX P.
Optimal design of a convergent barrel cold spray nozzle by numerical method
Proceedings of the 2006 International Thermal Spray Conference, May 15-18, Seattle, Washington, USA, Eds B.R. Marple, M.H. Hyland, Y.C. Lau, R.S. Lima and J.Voyer
LI W.Y., LIAO H.L., ZHANG G., CODDET C., WANG H.T., LI C.J.
Comparison of the photocatalytic behavior of TiO2 coatings elaborated by different thermal spraying processes
Proceedings of the 2006 International Thermal Spray Conference, May 15-18, Seattle, Washington, USA, Eds B.R. Marple, M.H. Hyland, Y.C. Lau, R.S. Lima and J.Voyer
TOMA F.L., SOKOLOV D., BERTRAND G., KLEIN D., CODDET C., MEUNIER C.
Thermal behavior of Y-PSZ TBCs in situ remelted during their deposition
pp 1417-1423, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
ANTOU G., HLAWKA F., MONTAVON G., CODDET C., CORNET A., MACHI F.
Pore network architecture and thermal conductivity of Y-PSZ TBCs in situ remelted during their deposition
pp 1424-1429, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
ANTOU G., HLAWKA F., BOLOT R., MONTAVON G., CODDET C., CORNET A.
Analysis of thermal fluxes transferred by an impinging HVOF jet
pp 992-997, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
BOLOT R., VERDY C., CODDET C., CORNU D., CHOULANT M.
Some key advices for the modeling of plasma jets using FLUENT
pp 1367-1371, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
BOLOT R., LI J., CODDET C.
Study of magnetic properties of iron-based thermally sprayed coatings
pp 254-258, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
CHERIGUI M., GUESSASMA S., FENINECHE N.E., LIAO H., CODDET C., CRAVEN J.
Magnetic properties of HVOF thermally sprayed coatings obtained from nanostructured powders
pp 558-562, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
CHERIGUI M., FENINECHE N.E., CODDET C., GANG J., GROSDIDIER T.
Robotic trajectory autogeneration in thermal spraying
pp 481-485, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
DENG S., LIAO H., ZENG C., CHARLES P., CODDET C.
Microstructure analysis of thermally sprayed abradable coatings
pp 1474-1479, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
FARAOUN H.I., SEICHEPINE J.L., AOURAG H., CODDET C., GROSDIDIER T., ZWICK J., HOPKINS N.
Effects of substrate surface condition on the flattening behavior of impinging splat
pp 777-784, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
LI H., LIAO H., COSTIL S., CODDET C.
Surface modification induced by the pulsed Nd-YAG laser irradiation in the PROTAL® process
pp 1021-1026, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
LI H., COSTIL S., CODDET C., BARNIER V., OLTRA R.
Role of the laser surface preparation on the adhesion of Ni-Al 5% coatings deposited using the PROTAL® process
pp 1397-1402, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
LI H., COSTIL S., LIAO H., CODDET C.
Correlating the spray pattern to the coating architecture: exploring the dominant mechanisms and process parameters
pp 798-809, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
MONTAVON G., BERNDT C.C., TRIFA F.I., GUESSASMA S.
On the measurement of substrate temperature during thermal spraying
pp 679-683, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
MOULLA L., SALHI Z., PLANCHE M.P., CHERIGUI M., CODDET C.
In flight particles analysis for the characterization of the arc spray process
pp 646-651, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
PLANCHE M.P., LIAO H., CODDET C.
Topological characterization of wear tracks in thermally sprayed abradable coatings
pp 1480-1484, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
SEICHEPINE J.L., ALBERTAZZI S., NARDIN P., CODDET C., SPORER D.
Coatings obtained by low pressure plasma spraying
pp 450-453, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
SOKOLOV D.E., CHWA S.O., KLEIN D., CODDET C., NARDIN P.
Photocatalytic decomposition of nitrogen oxides over TiO2 coatings elaborated by liquid feedstock plasma spraying
pp 476-480, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
TOMA F.L., BERTRAND G., KLEIN D., CODDET C., MEUNIER C.
Photocatalytic properties of nanostructured TiO2 and TiO2-Al coatings elaborated by HVOF spraying
pp 772-776, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
TOMA F.L., CHWA S.O., BERTRAND G., LIAO H., KLEIN D., CODDET C.
Integrating a deposition model for off-line spray tools programming
pp 280-285, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
TRIFA F.I., MONTAVON G., CODDET C.
Influence of annealing condition on crystallization behavior and mechanical properties of thermal sprayed PEEK coating
pp 732-737, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005,
Editor : E. Lugscheider
ZHANG G., LIAO H., CODDET C., YU H., MHAISALKAR S.G., JI V., HUANG W.
Transient thermal analysis and coating formation simulation of arc spray process
pp 1376-1381, Thermal Spray 2005 : Thermal Spray connects : Explore its surfacing potential ! Basel, Switzerland, 2-4 Mai 2005, Editor : E. Lugscheider
ZHU Y., LIAO H., CODDET C.
Development of robotic trajectories autogeneration in thermal spraying – A new extended program of ABB robotstudio TM
pp 97-104, Les deuxiemes rencontres Internationale sur la projection thermique, Lille, 1er et 2 décembre 2005
DENG S., LIAO H., ZENG C., CHARLES P., CODDET C.
Characterization via image analysis of the arc spray using two different wires
17th International Symposium on Plasma Chemistry, (SPC 17), Eds. J. Mostaghimi, TW Coyle, V.A. Pershin, H.R. Salimi Jazi, 7-12 aout 2005, Toronto, Canada
PLANCHE M.P., LIAO H., CODDET C.
Publications déposées en 1999 – 2004
Microstructure and electrical properties of plasma sprayed porous TiO2 coatings containing anatase
Thin Solid Films, 2004, Vol. 451-452, pp 37–42
WANG X.Y., LIU Z., LIAO H., KLEIN D., CODDET C.
Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation
Materials Letters, 2004, Vol. 58, pp 654-660
SAHRAOUI T., GUESSASMA S., FENINECHE N.E., MONTAVON G., CODDET C.
Modeling of the APS plasma spray process using artificial neural networks: basis, requirements and an example
Computational Materials Science, 2004, Vol. 29, pp 315-333
GUESSASMA S., MONTAVON G., CODDET C.
Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder
Tribology International, 2004, Vol. 37, pp 77–84
LI J.F., LIAO H., WANG X.Y., NORMAND B., JI V., DING C.X., CODDET C.
Al2O3–13% weight TiO2 deposit pro.les as a function of the atmospheric plasma spraying parameters
Materials and Design, 2004, Vol. 25, pp 307-315
GUESSASMA S., TRIFA F.I., MONTAVON G., CODDET C.
Evaluation of modifications induced on pore network and structure of partially stabilized zirconia manufactured by hybrid plasma spray process
Surface and Coatings Technology, 2004, Vol. 180 –181, pp 627–632
ANTOU G., MONTAVON G., HAWKA F., CORNET A., CODDET C., MACHI F.
Structure of amorphous iron-based coatings processed by HVOF and APS thermally spraying
Materials Chemistry and Physics, 2004, Vol. 85, pp 113–119
CHERIGUI M., FERAOUN H.I., FENINECHE N.E., AOURAG H., CODDET C.
Structure and magnetic properties study of iron-based thermally sprayed alloys
Materials Letters, 2004, Vol. 58, pp 1797– 1801
FENINECHE N.E., CHERIGUI M., AOURAG H., CODDET C.
Plasma spraying of nanostructured partially yttria stabilized zirconia powders
Thin Solid Films, 2004, Vol. 460, pp 101-115
LI J.F., LIAO H., WANG X.Y., CODDET C., CHEN H., DING C.X.
Alternative to chromium: characteristics and wear behavior of HVOF coatings for gas turbine shafts repair (heavy-duty)
Journal of Materials Processing Technology, 2004, Vol. 152, pp 43–55
SAHRAOUI T., FENINECHE N.E., MONTAVON G., CODDET C.
Determination of the young’s modulus of thermally sprayed coatings using a modellized cantilever test
La Revue de Metallurgie-CIT/Science et Genie des Materiaux, 2004, pp 109-114
LIAO H., FENG Z., JANDIN G., CODDET C.
Relationships between in-flight particle characteristics and coating microstructure with a twin wire arc spray process and different working conditions
Surface and Coatings Technology, 2004, Vol. 182, pp 215–226
PLANCHE M.P., LIAO H., CODDET C.
HVOF-sprayed Tribaloyn-400 : microstructure and first principle calculations
Materials Letters, 2004, Vol. 58, pp 2433– 2436
SAHRAOUI T., FERAOUN H.I., FENINECHE N., MONTAVON G., AOURAG H., CODDET C.
Effect of APS process parameters on wear behaviour of alumina–titania coatings
Materials Letters, 2004, Vol 58, pp 2451–2455
BOUNAZEF M., GUESSASMA S., MONTAVON G., CODDET C.
Artificial intelligence implementation in the APS process diagnostic
Materials Science and Engineering B, 2004, Vol. 110, pp 285–295
GUESSASMA S., SALHI Z., MONTAVON G., GOUGEON P., CODDET C.
Note on POD test parameters to study wear behaviour of alumina–titania coatings
Materials Characterization, 2004, Vol. 52, pp 237– 241
GUESSASMA S., BOUNAZEF M., CODDET C.
Neural computation to predict TiO2 photocatalytic efficiency for nitrogen oxides removal
Journal of Photochemistry and Photobiology A: Chemistry, 2004, Vol. 165, pp 91–96
TOMA F.L., GUESSASMA S., KLEIN D., MONTAVON G., BERTRAND G., CODDET C.
Electrochemical impedance spectroscopy and dielectric properties of polymer: application to PEEK thermally sprayed coating
Electrochimica Acta, 2004, Vol. 49, pp 2981–2986
NORMAND B., TAKENOUTI H., KEDDAM M., LIAO H., MONTEIL G., CODDET C.
Energetics and electronic properties of vacancies, anti-sites, and atomic defects (B, C, and N) in B2-FeAl alloys
Acta Materialia, 2004, Vol. 52, pp 3263–3271
KELLOU A., FERAOUN H.I., GROSDIDIER T., CODDET C., AOURAG H.
Ab initio calculations and experimental studies of site substitution of ternary elements in WC
Materials Science and Engineering B, 2004, Vol. 107, pp 1–7
SAHRAOUI T., KELLOU A., FERAOUN H.I., FENINECHE N., AOURAG H., CODDET C.
FeNb and FeSi thermal spraying coatings: microstructure and first principle calculations
Materials Science and Engineering B, 2004, Vol. 107, pp 27–32
FENINECHE N.E., CHERIGUI M., FERAOUN H.I., AOURAG H., CODDET C.
Processing of yttria partially stabilized zirconia thermal barrier coatings implementing a high power laser diode
Journal of Thermal Spray Technolgy, 2004, Vol. 13, N° 3, pp 381-389
ANTOU G., MONTAVON G., HIAWKA F., CORNET A., CODDET C., MACHI F.
Characterizations of the pore crack network architecture of thermal sprayed coatings
Materials Characterization, 2004, Vol. 53, pp 361-372
ANTOU G., MONTAVON G., HLAWKA F., CORNET A., CODDET C.
Microstructure of APS alumina–titania coatings analysed using artificial neural network
Acta Materialia, 2004, Vol. 52, pp 5157–5164
GUESSASMA S., CODDET C.
Environmental protection of metal structures at high temperature : state of the art and future trends
Materials Science Forum, 2004, Vol. 461-464, pp 193-212
CODDET C.
Recents developments in thermal spraying for improved coating characteristics and new applications/process controls and spray processes
High Temperature Material Processes, 2004, Vol. 8, pp 45-93
MONTAVON G.
Neural computation to predict in flight particle characteristic dependences from processing parameters in the APS process
Journal of Thermal Spray Technology, 2004, Vol. 13, N° 4, pp 570-585
GUESSASMA S., MONTAVON G., CODDET C.
The wear, deterioration and transformation phenomena of abradable coating BN–SiAl–bounding organic element, caused by the friction between the blades and the turbine casing
Materials Letters, 2004, Vol. 58, pp 3375– 3380
BOUNAZEF M., GUESSASMA S., AIT SAADI B.
Empirical formula relating the bulk modulus to the lattice constant in tetrahedral semiconductors
Materials Chemistry and Physics, 2004, Vol. 87, pp 14–17
AL-DOURI Y., ABID H., AOURAG H.
Effect of Al-doping on lithium nickel oxides
Journal of Power Sources, 2004, Vol. 130, pp 213–220
AMRIOU T., SAYEDE A., KHELIFA B., MATHIEU C., AOURAG H.
Le procédé PROTAL, couplage d’une préparation de surface et d’un revêtement
Galvano-Organo, 2004, Vol. 241, pp 64-67
COSTIL S.
Electronic structure of Ti2CAl and Ti2NAl
Materials Science and Engineering B, 2004, Vol. 110, pp 280–284
FARAOUN H., TERKI R., ESLING C., AOURAG H.
Analytical investigation of solitary waves in nonlinear Kerr medium
Optical Materials, 2004, Vol. 27, pp 203–209
GOUMRI-SAID S., MOUSSA R., BELGOUMENE B., AOURAG H.
Empirical molecular dynamics study of structural, elastic and thermodynamic properties of zinc-blende-like SiGe compound
Materials Science and Engineering B, 2004, Vol. 111, pp 207–213
GOUMRI-SAID S., BENALI KANOUN M., MERAD A.E., MERAD G., AOURAG H.
Characterization via image analysis of cross-over trajectories and inhomogeneity in twin wire arc spraying
Surface and Coatings Technology, 2003, Vol. 162, pp 301–308
ZHU Y.L., LIAO H.L., CODDET C., XU B.S.
Correlations between operating conditions, microstructure and mechanical properties of twin wire arc sprayed steel coatings
Materials Science and Engineering A, 2003, Vol. 49, pp 298-305
JANDIN G., LIAO H., FENG Z.Q., CODDET C.
Interlamellar boundary characterization in Ni-based alloy thermally sprayed coating
Materials Science and Engineering A, 2003, Vol. 351, pp 325-333
MOLINS R., NORMAND B., RANNOU G., HANNOYER B., LIAO H.
In flight characteristics of plasma sprayed alumina particles : measurements, modeling and comparison
Journal of Thermal Spray Technology, 2003, Vol. 12, N° 1, pp 101-111
PLANCHE M.P., BOLOT R., CODDET C .
The effect of the slurry formulation upon the morphology of spray dried yttria stabilised zirconia particles
Journal of the European Ceramic Societey, 2003, Vol. 23, pp 1637-1648
MAHDJOUB H., ROY P., FILIATRE C., BERTRAND G., CODDET C.
Microstructure of plasma sprayed titania coatings deposited from spray dried powder
Surface and Coatings Technology, 2003, Vol. 168, pp 281-290
BERGER-KELLER N., BERTRAND G., FILIATRE C., MEUNIER C., CODDET C.
Nanostructures in thermal spray coatings
Scripta Materialia, 2003, Vol. 48, pp 1599–1604
GANG J., MORNIROLI J.P., GROSDIDIER T.
Effect of residual stresses on air plasma sprayed thermal barrier coatings
Surface and Coatings Technology, 2003, Vol. 168, pp 291–299
NUSAIR KHAN A., LU J., LIAO H.
Effect of a localized thermal treatment process on the electrochemical behaviour of thermally sprayed nickel-based alloy
Surface and Coatings Technology, 2003, Vol. 166, pp 167–175
WANG X.Y., LI J.F., LIAO H., NORMAND B., DING C.X., CODDET C.
Modification of ceramic thermal spray deposit microstructures implementing in situ laser remelting
Surface and Coatings Technology, 2003, Vol. 172, pp 279–290
ANTOU G., MONTAVON G., HLAWKA F., CORNET A., CODDET C., MACHI F.
Designing expert system using neural computation in view of the control of plasma spray process
Materials and Design, 2003, Vol. 24, pp 497-502
GUESSASMA S., MONTAVON G., GOUGEON P., CODDET
On the implementation of the fractal concept to quantify thermal spray deposit surface characteristics
Surface and Coatings Technology, 2003, Vol. 173, pp 24-38
GUESSASMA S., MONTAVON G., CODDET C.
Heat treatment of thermal barrier coatings
Materials Science and Engineering A, 2003, Vol. 359, pp 129-136
NUSAIR KHAN A., LU J., LIAO H.
Structure and wear behaviour of HVOF sprayed Cr3C2 – NiCr and WC-Co coatings
Materials and Design, 2003, Vol. 24, pp 309-313
SAHRAOUI T., FENINECHE N.E., MONTAVON G., CODDET C.
Uniform design method for optimization of process parameters of plasma sprayed TiN coatings
Surface and Coatings Technology, 2003, Vol. 176, pp 1–13
LI J.F., LIAO H., NORMAND B., CORDIER C., MAURIN G., FOCT J., CODDET C.
Harmful risks for workers in thermal spraying : A review completed by a survey in a french company
Journal of Thermal Spray Technology, 2003, Vol. 12, N° 4, pp 542-554
HERIAUD-KRAEMER H., MONTAVON G., HERTERT S., ROBIN H., CODDET C.
Alumina slurry formulation intender for spray dried powder production
Polymer International, 2003, Vol. 52, pp 586-589
FILIATRE C., BERTRAND G., CODDET C., FOISSY A.
High properties metallic alloys obtained through the thermal spray route
Materials Science Forum, 2003, Vol. 426, N° 4, pp 2467-2472
CODDET C., VERDY C., DEMBINSKI L., GROSDIDIER T., CORNU D., GARCIA J.C.
Fractal perimeters of polishing induced pull outs present on polished cross sections of plasma sprayed yttria stabilized zirconia coatings
Journal of American Ceramic Society, 2003, Vol. 86, N° 11, pp 1906-1910
LI J., LIAO H., WANG X., CODDET C.
Elaboration and characterization of environmental properties of TiO2 plasma sprayed coatings
International Journal of Photoenergy, 2003, Vol. 5, pp 141-145
TOMA L., KELLER N., BERTRAND G., KLEIN D., CODDET C.
Elastic properties of zinc blende GaN, AlN and InN from molecular dynamics
Molecular simulation, 2003, Vol. 29, N° 3, pp 201-209
BENKABOU F., CERTIER M., AOURAG H.
Simultaiton and application of a HVOF process for MCrAlY thermal spraying
YANG Y.M., LIAO H., CODDET C.
Journal of Thermal Spray Technology, 2002, Vol. 11, N° 1, pp 36-43
Finite element analysis of effect of substrate surface roughness on liquid droplet impact and flattening process
FENG Z.G., DOMASZEWSKI M., MONTAVON G., CODDET C.
Journal of Thermal Spray Technology, 2002, Vol. 11, N° 1, pp 62-68
Influence of HVOF spraying parameters on in flight characteristics of inconel 718 particles and correlation with the electrochemical behaviour of the coating
PLANCHE M.P., NORMAND B., LIAO H., RANNOU G., CODDET C.
Surface and Coatings Technology, 2002, Vol. 157, pp 247-256
Friction and wear behavior of flame sprayed PEEK coatings
LI J., LIAO H., CODDET C.
Wear, 2002, Vol. 252, pp 824-831
Dried particle plasma spray in flight synthesis of spinel coatings
BERTRAND G., MEUNIER C., BERTRAND P., CODDET C.
Journal of the European Ceramic Society, 2002, Vol. 22, pp 891-902
Surface engineering by thermal spraying nanocrystalline coatings : X-ray and TEM characterisation of As-deposited iron aluminide structure
JI G., MORNIROLI J.P., TIDU A., CODDET C., GROSDIDIER T.
Journal de Physique IV France, 2002, Vol. 12, N° 6, pp 509-518
A new form of the sutton chen pottential for the Cu-Ag alloys
FERAOUN H., ESLING C., DEMBINSKI L., GROSDIDIER T., CODDET C., AOURAG H.
Superlattices and Microstructures, 2002, Vol. 31, N° 6, pp 297-313
Evolution of recrystallisation texture and microstructure in low alloyed titanium sheets
WAGNER F., BOZZOLO N., VAN LANDUYT O., GROSDIDIER T.
Acta Materialia, 2002, Vol. 50, pp 1245–1259
On the use of a low rreynolds extension to the chen-kim (k-e) model to predict thermal exchanges in the case of an impinging plasma jet
BOLOT R., IMBERT M., CODDET C.
International Journal of Heat and Mass Transfer, 2001, Vol. 44, pp 1095-1106
Nanocrystalline Fe-40Al coating processed by thermal spraygin of milled powder
GROSDIDIER T., TIDU A., LIAO H.
Scripta Materialia, 2001, Vol. 44, pp 387-393
Simultaneous laser generation and laser ultrasonic detection of the mechanical breakdown of a coating substrate interface
ROSA G., PSYLLAKI P., OLTRA R., COSTIL S., CODDET C.
Ultrasonics, 2001, Vol. 39, pp 355-365
Laser surface treatment for subsequent thermal spray deposition
COSTIL S., VERDIER M., MONTAVON G., CODDET C.
Lasers in Engineering, 2001, Vol. 11, pp 91-108
Development of modified embedded atom potentials for the Cu-Ag system
FERAOUN H., AOURAG H., GROSDIDIER T., KLEIN D., CODDET C.
Superlattices and MIcrostructures, 2001, Vol. 30, N° 5, pp 261-271
Laser ultrasonic testing for estimation of adhesion of Al2O3 plasma sprayed coatings
ROSA G., PSYLLAKI P., OLTRA R., MONTESIN T., CODDET C., COSTIL S.
Surface Engineering, 2001, Vol. 17, N° 4, pp 332-338
Quantification of plasma sprayed coating adhesion using pulsed laser induced decohesion technique
ROSA G., OLTRA R., CODDET C., COSTIL S., NADAL M.H.
Surface Engineering, 2001, Vol. 17, N° 6, pp 472-476
A comparative study of mechanical properties and residual stress distributions of copper coatings obtained by different thermal spray processes
GASSOT H., JUNQUERA T., JI V., JEANDIN M., GUIPONT V., CODDET C., VERDY C., GRANDSIRE L.
Surface Engineering, 2001, Vol. 17, N° 4, pp 317-322
Tribological properties of plasma sprayed alumina titania coatings : role and control of the microstructure
NORMAND B., FERVEL V., CODDET C., NIKITINE V.
Surface and Coatings Technology, 2000, Vol. 123, pp 278-287
Influence of coating microstructure on the abrasive wear resistance of WC/Co cermet coatings
LIAO H., NORMAND B., CODDET C.
Surface and coatings technology, 2000, Vol. 124, pp 235-242
Application du laser impulsionnel à l’étude de l’adhérence et de la structure des dépôts
ROSA G., VIGNAL V., OLTRA R., SARTORI C., BOQUILLON J.P., CODDET C., COSTIL S.
Materiaux et Techniques, 2000, N° 1-2, pp 41-48
Characterization of flame sprayed PEEK coatings by FTIR-ATR, DSC and acoustic microscopy
SIMONIN L., LIAO H.
Macromolecular Materials and Engineering, 2000, Vol. 283, pp 153-162
Caractérisation et assemblage de matériaux métalliques obtenus par projection thermique sous basse pression
VERDY C., CODDET C., CORNU D., DEMONICAULT J.M., MARTIN J.B., GARCIA J.C., PELLERIN F.
Journal de Physique IV, 2000, Vol. 4, N° 4, pp 49-60
Caractéristiques mécaniques d’assemblages réalisés par projection thermique
CODDET C., MONTAVON G., VERDY C.
La revue de Metallurgie-CIT/Science et Genie des Materiaux, 2000, pp 613-620
Friction and wear mechanisms of thermally sprayed ceramic and cermet coatings
FERVEL V., NORMAND B., LIAO H., CODDET C., BECHE E., BERJOAN R.
Surface and Coatings Technology, 1999, Vol. 111, pp 255-262
Tribological behavior of plasma sprayed Al2O3 based cermet coatings
FERVEL V., NORMAND B., CODDET C.
Wear, 1999, Vol. 230, pp 70-77
Surface preparation and thermal spray in a single step : The protal process – example of application for an aluminum base substrate
CODDET C., MONTAVON G., AYRAULT-COSTIL S., FRENEAUX O., RIGOLET F., BARBEZAT G., FOLIO F., DIARD A., WAZEN P
Journal of Thermal Spray Technology, 1999, Vol. 8, N° 2, pp 235-242
Modelling and measurements of particle in flight chararacteristics of atmospheric plasma sprayed yttria stabilised zirconia µ
NYLEN P., BOLOT R., HANSBO A., CODDET C.
Heat and Mass transfer Under Plasma Conditions, Vol. 891, décembre 1999, pp 236-245
Modeling of the torsional behavior of plasma sprayed copper
KAAYOU B., ATCHOLI K.E., VANTOMME J.
Composite Structures, 1999, Vol. 44, pp 129-136
High heat flux thermal cycling of FGM thermal barrier coatings using a HVOF gun
VERDY C., ABBOUDI s., CODDET c., CORNU d., DEMONICAULT J.M.
Materials Science Forum, 1999, Vols 308-311, pp 434-441
Autres publications et Actes de colloques
Determination of the Moving Velocity of Preheating Gun During Preheating/Spraying/Cooling Process by a Function Specification Method
pp 633-640, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
LIAO H., DENG H., VERDY C., CODDET C.
Experimental Correlation between Flattening Degree and Reynolds Number of Spray Particles
pp 863-869, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
LI C.J., LIAO H., GOUGEON P., MONTAVON G., CODDET C.
Effect of Reynolds Number of Molten Spray Particles on Splat Formation in Plasma Spraying
pp 875-882, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
LI C.J., LIAO H., GOUGEON P., MONTAVON G., CODDET C.
Influence of Surface Laser Cleaning Combined with Substrate Preheating on the Splat Morphology
pp 883-888, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
LIAO H., GAMMOUDI A., COSTIL S., CODDET C.
Modeling of the substrate temperature evolution during the APS thermal spray process
pp 949-954, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
BOLOT R., LI J., BONNET R., MATEUS C., CODDET C.
On the study of thermal fluxes transferred during the HEATCOOL process
pp 965-970, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
BOLOT R., DENG H., LIAO H., CODDET C.
On the use of SYSWELD and PHOENICS for the computation of heat transfer in a substrate exposed to an impinging plasma jet
pp 971-976, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
LI J.,BOLOT R., LIAO H., CODDET C.
Application of CFD for Wire-Arc Nozzle Geometry Improvement
pp 977-980, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
GEDZEVICIUS I.,BOLOT R., LIAO H., CODDET C.
Conjugated Gradient Method for Estimating Inversely the Flux Distribution of Cooling Jets
pp 981-984, Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, 2003
On the neural network concept to describe the thermal spray deposition process : an introduction
GUESSASMA S., MONTAVON G., CODDET C.
pp 435-439, Internationale Thermal Spray Conference, ITSC 2002, Ed. E. Lugscheider, Essen, Germany, 4-6 mars 2002
On the neural network concept to describe the thermal spray deposition process : correlation between in flight particles characteristics and processing parameters
GUESSASMA S., MONTAVON G., GOUGEON P., CODDET C.
pp 453-458, Internationale Thermal Spray Conference, ITSC 2002, Ed. E. Lugscheider, Essen, Germany, 4-6 mars 2002
Influence of the nozzle design on the structure of a plasma jet under vacuum conditions
BOLOT R., KLEIN D., CODDET C.
pp 938-943, Internationale Thermal Spray Conference, ITSC 2002, Ed. E. Lugscheider, Essen, Germany, 4-6 mars 2002
Alumina plasma sprayed coatings submitted to cyclic tribological solicitations : effect of TiO2 content
COSTIL S., NORMAND B., CODDET C., LANGLADE-BOMBA C., VANNES A.B.
pp 944-948, Internationale Thermal Spray Conference, ITSC 2002, Ed. E. Lugscheider, Essen, Germany, 4-6 mars 2002
Fractal dimension as an indicator of thermal spray coatings roughness
GUESSASMA S., MONTAVON G., CODDET C., MANCINI C., BERNDT C.C.
pp 949-953, Internationale Thermal Spray Conference, ITSC 2002, Ed. E. Lugscheider, Essen, Germany, 4-6 mars 2002
Relationship between in flight particle characteristics and coating microstructure for the twin wire arc spray process
JANDIN G., PLANCHE M.P., LIAO H., CODDET C.
pp 954-959, Internationale Thermal Spray Conference, ITSC 2002, Ed. E. Lugscheider, Essen, Germany, 4-6 mars 2002
Three dimensional transient modeling of the substrate temperature evolution during the coating elaboration
BOLOT R., IMBERT M., CODDET C.
pp 979-984, Internationale Thermal Spray Conference, ITSC 2002, Ed. E. Lugscheider, Essen, Germany, 4-6 mars 2002
Elaboration et caractérisation des propriétés environnementales de dépôts de dioxyde de titane obtenus par projection thermique
TOMA F.L., KELLER N., BERTRAND G., CODDET C., KLEIN D.
Materiaux 2002 de la conception a la mise en oeuvre, Tours 21-25 octobre 2002
Développement de dépôts par projection thermique à très faible pression
KLEIN D., SALHI Z., DEMBINSKI L., BOLOT R., GOUGEON P., GROSDIDIER T., AOURAG H., CODDET C.
Materiaux 2002 de la conception a la mise en oeuvre, Tours 21-25 octobre 2002
Le plasma formage d’alliages base cuivre : conditions d’élaboration, microstructures et propriétés
DEMBINSKI L., VERDY C., GROSDIDIER T., CODDET C., CORNU D.
Materiaux 2002 de la conception a la mise en oeuvre, Tours 21-25 octobre 2002
Caractérisation de l’oxydation interlamellaire de revêtements d’alliage 718
MOLINS R., NORMAND B., RANNOU G., LIAO H.
Materiaux 2002 de la conception a la mise en oeuvre, Tours 21-25 octobre 2002
Surface engineering by thermal spraying nanocrystalline coatings : the case of iron aluminide
JI G., GROSDIDIER T., LIAO H., MORNIROLLI J.P.
Materiaux 2002 de la conception a la mise en oeuvre, Tours 21-25 octobre 2002
Elaboration et caractérisation de poudres de zircone yttriee pour la projection thermique par mécanosynthèse
MEUNIER C., BERTRAND G., GAFFET E.
Materiaux 2002 de la conception a la mise en oeuvre, Tours 21-25 octobre 2002
On the tailoring of spray dried thermal spray powders
KELLER N., BERTRAND G., COMAS B., CODDET C.
pp 285-290 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
Mechanical properties of thermal spray PEEK coatings
LIAO H., CODDET C., SIMONIN L.
pp 315-320 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
On the adhesion mechanisms of thermal spray deposits manufactured while implementing the PROTAL process
VERDIER M., MONTAVON G., COSTIL S., CODDET C.
pp 553-560 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
In situ structural modification of thermal spray grey alumina coatings implementing laser ablation
MONTAVON G., VERDIER M., CODDET C.
pp 567-573 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
On the microstructure of vacuum plasma sprayed Cu-3%Ag alloy
DEMBINSKI L., GROSDIDIER T., CODDET C.
pp 633-637 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
The relationships between in flight particles characteristics and coatings properties under plasma spraying conditions
PLANCHE M.P., NORMAND B., SUZON E., CODDET C.
pp 771-777 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
Correlation between simulation and plasma sprayed coatings properties
BOLOT R., MONIN V., CODDET C.
pp 883-888 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
Application of CAD to CFD for the wire arc spray process
BOLOT R., BONNET R., JANDIN G., CODDET C.
pp 889-894 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
Modeling of the natural gas HVOF process
BOLOT R., PLANCHE M.P., CODDET C.
pp 911-916 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
Modification of ceramic thermal spray deposit microstructure implementing laser treatment
MONTAVON G., CODDET C.
pp 1195-1202 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
Non destructive testing for the estimation of the adhesion of plasma sprayed coatings
COSTIL S., CODDET C., ROSA G., PSYLLAKI P., OLTRA R.
pp 1229-1234 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
Protal processing of titanium alloys as an alternative to degreasing and grit blasting prior to thermal spraying
CODDET C., MONTAVON G., VERDIER M., COSTIL S., BARBEZAT G.
pp 1321-1328 of Thermal Spray 2001 : New Surfaces for a New Millennium, Ed. C.C. Berndt, K.A. Khor and E.F. Lugscheider, Pub. ASM international, Materials Park, OH-USA,1360+ pages (Singapore)
Identification of the young’s modulus of thermally sprayed coatings using a modified cantilever test combined with finite element modeling
LIAO H., FENG Z., JANDIN G., CODDET C.
pp 139-144, Colloque GFAC – SF2M ouest 22 et 23 Mars 2001
Comparison of TiO2 crystalline structures obtained using different thermal spray process
CODDET C., OHMORI A., LI C.J., LIAO H., BERTRAND G., MEUNIER C., KLEIN D.
pp 3-6, Proceedings of First International Symposium on Environmental Materials and Recycling, Mars 2001, Osaka, Japan
The benefits of the PROTAL process on the adhesion of thermal sprayed coating
BARBEZAT G., FOLIO F., CODDET C., MONTAVON G.
pp 57-61, Thermal Spray : Surface Engineering via Applied Research Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH, USA, 2000, 1383+pages, (Montreal)
X-rays and TEM characterization of nanocrystalline iron aluminide coatings prepared by HVOF thermal spraying
GROSDIDIER T., LIAO H., TIDU A.
pp 1341-1344, Thermal Spray : Surface Engineering via Applied Research Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH, USA, 2000, 1383+pages, (Montreal)
Plasma spraying of spray dried Al2O3 powders
BERTRAND G., HANSZ B., TOURENNE F., CODDET C.
pp 1371-1376, Thermal Spray : Surface Engineering via Applied Research Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH, USA, 2000, 1383+pages, (Montreal)
Thermal effects on the structure and characteristics of plasma sprayed self fluxing alloys
BERTRAND G., MALAVOLTA C., TOURENNE F., HANSZ B., CODDET C., GOURLAOUEN V.
pp 1377-1381, Thermal Spray : Surface Engineering via Applied Research Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH, USA, 2000, 1383+pages, (Montreal)
A comparative study of mechanical properties and residual stress distributions of copper coatings obtained by different thermal spray processes
GASSOT H., JUNQUERA T., JI V., JEANDIN M., GUIPONT V., CODDET C., VERDY C., GRANDSIRE L.
pp 16-23, Proceeding of the fourteenth international conference on surface modification technologies held in paris, France, Septembre 11-13, 2000
Experimental results on in-flight particle characteristics obtained under low pressure spraying conditions
PLANCHE M.P., LAITHIER J.F., GOUGEON P., CODDET C.
Papier présenté en oral au Congrés de Montreal, 8-12 Mai 2000
Thermal spray deposition of metallic and ceramic coating on aluminium and titanium alloys using the PROTAL process
FOLIO F., BARBEZAT G., CODDET C., MONTAVON G., COSTIL S., FRENEAUX O.
pp 196-201 of Tagungsband Conference, Ed. Lugscheider E. and Kammer P.A., 17-19 Mars 1999, Dusseldorf, Germany
Simulation fo the thermal spray process and off line programming
BONNET R., BOLOT R., CODDET C.
pp 519-526 of Tagungsband Conference, Ed. Lugscheider E. and Kammer P.A., 17-19 Mars 1999, Dusseldorf, Germany
Principles of rapid tooling using an improved thermal spray process
JANDIN G., LIAO H., CODDET C.
pp 102-105, International Conference on Advanced Manufacturing Technology, 16-18 Juin 1999, Xi’an, China
Off line programming of thermal spray robots and simulation of the process using a dedicated software
BONNET R., CODDET C.
pp 497-501, International Conference on Advanced Manufacturing Technology, 16-18 Juin 1999, Xi’an, China
The plasma spray forming of high duty functional prototypes
CODDET C., MONTAVON G., VERDY C., HUCHIN J.P., MANESSE D., DEMONICAULT J.M., CORNU D., PELLERIN F., GARCIA J.C.
pp 1133-1136, International Conference on Advanced Manufacturing Technology, 16-18 Juin 1999, Xi’an, China
Study and development of corrosion resistant thermal spray coatings
NORMAND B., CODDET C.
pp 194-203, 11th Asian-Pacific Corrosion control Conference, 1-5 novembre 1999, Ho Chi Minh City, Vietnam
Publications déposées en 1993 – 1998
Microstructural index to quantify thermal spray deposit microstructures using image analysis
MONTAVON G., CODDET C., BERNDT C.C., LEIGH S.H.
Journal of Thermal Spray Technology, 1998, Vol. 7, N° 2, pp 229-241
Mechanical properties of metal – and ceramic – polymer composites formed via thermal spray consolidation
BERNDT C.C., BROGAN J.A., MONTAVON G., CLAUDON A., CODDET C.
Journal of Thermal Spray Technology, 1998, Vol. 7, N° 3, pp 337-339
Numerical study of an ArH2 gas mixture flowing inside and outside a dc plasma torch
EICHERT P., IMBERT M., CODDET C.
Journal of Thermal Spray Technology, 1998, Vol. 7, N° 4, pp 505-512
Les applications industrielles de la projection thermique : marché et domaines sectoriels
MONTAVON G., HANSZ B., CODDET C., TOURENNE F., KASSABJI F.
Les cahiers de l’Ingenierie, 1998, Vol. 67, pp 9-15
Quality control of the intrinsic deposition efficiency from the controls of the splat morphologies and the deposit microstructure
MONTAVON G., BERNDT C.C., CODDET C., SAMPATH S., HERMAN H.
Journal of Thermal Spray Technology, 1997, Vol. 6, N° 2, pp 153-166
Determination of residual stress distribution from in situ curvature measurements for thermally sprayed WC/Co coatings
LIAO H., VASLIN P., YANG Y., CODDET C.
Journal of Thermal Spray Technology, 1997, Vol. 6, N° 2, pp 235-241
Effects of the spray angle on splat morphology during thermal spraying
MONTAVON G., SAMPATH S., BERNDT C.C., HERMAN H., CODDET C.
Surface and Coatings Technology, 1997, Vol. 91, pp 107-115
Quantification of particle morphologies in view of quality control of the thermal spray process
MONTAVON G., CODDET C.
Materials Characterization, 1996, Vol. 36, N° 4-5, pp 257-269
An XPS and FTIR study of SO2 adsorption on SnO2 surfaces
BERGER F., BECHE E., BERJOAN R., KLEIN D., CHAMBAUDET A.
Applied Surface Science, 1996, Vol. 93, pp 9-16
Effect of thermal spray process selection on tribological performance of WC-Co and Al2O3-TiO2 coatings
NAERHEIM Y., CODDET C., DROIT P.
Surface engineering, 1995, Vol. 11, N° 1, pp 66-70
Calculation of a plasma jet using phoenics
EICHERT P., IMBERT M., CODDET C.
The phoenics journal of computational fluid dynamics and its applications, 1995, Vol. 8, N° 1, pp 29-50
Effects of Vacuum Plasma Spray processing parameters on splat morphology
MONTAVON G., SAMPATH S., BERNDT C.C., HERMAN H., CODDET C.
Journal of Thermal Spray Technology, 1995, Vol. 4, N° 1, pp 67-74
SiCN amorphous materials chemical vapour deposited using the Si(CH3)4-NH3-H2 system
BENDEDDOUCHE A., BERJOAN R., BECHE E., SCHAMM S., SERIN V., CARLES R., HILLEL R.
Journal de physique IV, 1995, Vol. 5, N° 5, pp C5.793-C5.800
The spray-forming of thin wall shapes
MONTAVON G., ROUSSEL E., CODDET C., CORNU D., DE MONICAULT J.M., GARCIA J.C., PELLERIN F., FAUVET E., HUCHIN J.P.
Journal de Physique IV, Supplément au journal de physique III, Vol. 3, 1993, pp 277-282
Autres publications et Actes de colloques
On the microstructures of thermally sprayed « peek » polymer
LIAO H., BECHE E., BERGER F., CODDET C.
pp 25-29 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Corrosion resistance of thermal spray inconel 690 coatings
NORMAND B., LIAO H., LANDEMARRE O., CODDET C., PAGETTI J.
pp 69-73 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Tribological properties of Mo/NiCrBSi thermal spray deposits
FERVEL V., NORMAND B., CODDET C., DELAET M.
pp 237-241 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Comparison between experimental and numerical results obtained on in flight particles characteristics
PLANCHE M.P., BOLOT R., LANDEMARRE O., CODDET C.
pp 355-360 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Finite elements modeling of liquid particle impacting onto flat substrates
FENG Z.G., MONTAVON G., FENG Z.Q., CODDET C., DOMASZEWSKI M.
pp 395-400 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Numerical modeling and simulation of particle behaviors in an HVOF supersonic flow
YANG Y.M., CODDET C., IMBERT M.
pp 431-438 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Mathematical modeling of a plasma jet impinging on a flat structure
BOLOT R., CODDET C., IMBERT M., MONIN V.
pp 439-445 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
On the behavior of thick and porous copper deposits under compressive stress
VERDY C., MONTAVON G., CODDET C.
pp 647-652 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Controls for plasma spraying based on plasma jet stability analysis
BEALL L., DUAN Z., SCHEIN J., STACHOWICZ M., PLANCHE M.P., HEBERLEIN J.
pp 815-820 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
In situ temperature measurement using embedded micro-thermocouples in vacuum plasma sprayed multi-layered structures
VERDY C., SERIO B., CODDET C.
pp 821-824 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice) »
Mechanical properties of spray formed composite structures
BROGAN J.A., BERNDT C.C., CLAUDON A., CODDET C.
pp 1173-1178 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Impact toughness of thick multilayer thermal spray deposits
VERDY C., CODDET C., MARTIN J.B., GARCIA J.C., PELLERIN F.
pp 1239-1244 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Co2 cooling in thermal spraying
GOURLAOUEN V., HANSZ B., REMY F., CODDET C.
pp 1293-1297 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Surface preparation and thermal spray in a single step : the protal© process
CODDET C., MONTAVON G., MARCHIONE T., FRENEAUX O.
pp 1321-1325 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice) »
Thermal spray deposition of a copper coating on aluminium using the protal process
AYRAULT-COSTIL S., MONTAVON G., CODDET C., RIGOLLET F., FRENEAUX O., FOLIO F., BARBEZAT G., WASEN P., DIARD A.
pp 1409-1413 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
High heat flux thermal cycling of multi layered deposits using a HVOF gun : modelisation and experiments
VERDY C., RIAD H., RAVIART O., ABBOUDI S., CODDET C., CORNU D., DE MONICAULT J.M.
pp 1571-1575 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
Study of damage processes in plasma sprayed bond coat under thermal cycling
BONNET P., ABBOUDI S., NORMAND B.
pp 1607-1611 of Thermal Spray Meeting the Challenges of the 21st Century, Ed. C. Coddet, Pub. ASM international, Materials Park, OH-USA, 1998, 1693+ pages (Nice)
On the flattening behavior of fully molten particles impacting onto solid substrates under thermal spray conditions
FENG Z.G., MONTAVON G., FENG Z.Q., CODDET C., DOMASZEWSKI M.
Journée d’études « Phénomènes de transport intervenant lors de la projection de particules sur une surface », France, 1998, 12 pages
Thermal spray coating developments for piston rings to be used in tomorrow’s duty engines
DELAET M., CODDET C.
pp 1-9 of Thermal spray : A United Forum for Scientific and Technological Advances, Ed. C.C. Berndt, Pub. ASM International, Materials Parck, OH-USA, 1997, 1020+ (Indianapolis)
Mathematical modeling of a free plasma jet discharging into air and comparison with probe measurements
BOLOT R., IMBERT M., CODDET C.
pp 549-555 of Thermal spray : A United Forum for Scientific and Technological Advances, Ed. C.C. Berndt, Pub. ASM International, Materials Parck, OH-USA, 1997, 1020+ (Indianapolis)
Influence of the spray parameters on the transient pressure within a molten particle impacting onto a flat substrate
MONTAVON G., FENG Z.G., CODDET C., FENG Z.Q., DOMASZEWSKI M.
pp 627-633 of Thermal spray : A United Forum for Scientific and Technological Advances, Ed. C.C. Berndt, Pub. ASM International, Materials Parck, OH-USA, 1997, 1020+ (Indianapolis)
Caractérisations de dépôts multicouches élaborés par projection thermique
VERDY C., CODDET C.
Colloque I2M, Aix en Provence, France, 1997
The effect of spraying conditions on the corrosion resistance of titanium coatings for surgical implants
NORMAND B., RENAUD F., CODDET C., TOURENNE F.
pp 73-78 of Thermal Spray : Practical Solutions for Engineering Problems, Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH-USA, 1996, 992+ pages (Cincinnati)
The mechanical properties of combustion sprayed polymers and blends
BROGAN J.A., BERNDT C.C., CLAUDON A., CODDET C.
pp 221-226 of Thermal Spray : Practical Solutions for Engineering Problems, Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH-USA, 1996, 992+ pages (Cincinnati)
On the modeling approach of DC arc plasma flows by implementation of the CFD phoenics code
EICHERT P., CODDET C., IMBERT M.
pp 563-568 of Thermal Spray : Practical Solutions for Engineering Problems, Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH-USA, 1996, 992+ pages (Cincinnati)
Stereological characterization of the apparent void content of thermal spray deposits
MONTAVON G., CODDET C.
pp 741-747 of Thermal Spray : Practical Solutions for Engineering Problems, Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH-USA, 1996, 992+ pages (Cincinnati)
Characterization of the tensile properties of vacuum plasma spray copper deposits
MONTAVON C., ROBERT B., VERDY C., MONIN V., ATCHOLI K.E., CODDET C.
pp 827-833 of Thermal Spray : Practical Solutions for Engineering Problems, Ed. C.C. Berndt, Pub. ASM International, Materials Park, OH-USA, 1996, 992+ pages (Cincinnati)
Etude des propriétés des assemblages dans les structures partiellement mises en forme par projection thermique
CODDET C., MONTAVON G., VERDY C.
p 117, Journées d’Automne, SF2M, Paris, 15-17 octobre 1996
Résistance à la corrosion de revêtements de céramiques obtenus par projection thermique vis à vis de l’aluminium fondu
CODDET C., KIND J., NORMAND B.
p 151, Journées d’Automne, SF2M, Paris, 15-17 octobre 1996
Mise en forme des intermétalliques TiAl par projection thermique
LANDEMARRE O., COLIN C., CODDET C.
p 209, Journées d’Automne, SF2M, Paris, 15-17 octobre 1996
Approche locale de l’endommagement sous des conditions thermiques variables
ABBOUDI S., BONNET P.
Journées Nationales des Composites, les 29, 30 et 31 Octobre 1996, ENSAM, Paris, France
Effects of the substrate nature on the splat morphology of vacuum plasma sprayed deposits
MONTAVON G., SAMPATH S., BERNDT C.C., HERMAN H., CODDET C.
pp 365-370 of Thermal Spraying Current Status and Future Trends, Ed A. Ohmori, Pub. High Temperature Society of Japan, Osaka, Japan, 1995, 1226+ pages (Kobe)
Numerical modeling of combustion and flow characteristics in HVOF systems with chemical equilibrium approach
YANG Y.M., LIAO H., CODDET C.
pp 399-404 of Thermal Spraying Current Status and Future Trends, Ed A. Ohmori, Pub. High Temperature Society of Japan, Osaka, Japan, 1995, 1226+ pages (Kobe)
Surface property modification using vacuum plasma coating
KHANNA A.S., CODDET C., HARENDRANATH C.S., ANUJA K.
pp 577-583 of Thermal Spraying Current Status and Future Trends, Ed A. Ohmori, Pub. High Temperature Society of Japan, Osaka, Japan, 1995, 1226+ pages (Kobe)
Heuristic modeling of some characteristics of vacuum plasma sprayed nickel based alloy deposit
MONTAVON G., CODDET C.
pp 1109-1114 of Thermal Spraying Current Status and Future Trends, Ed A. Ohmori, Pub. High Temperature Society of Japan, Osaka, Japan, 1995, 1226+ pages (Kobe)
Heuristic modeling of thermally sprayed powder splat characteristics
MONTAVON G., CODDET C.
pp 225-230 of Thermal Spray Science & Technology, Eds C.C. Berndt and S. Sampath, Pub. ASM International, Materials Park, OH-USA, 1995, 774+ pages (Houston)
Quantitative analysis of thermal spray deposits using stereology
LEIGH S.H., SAMPATH S., HERMAN H., BERNDT C.C., MONTAVON G., CODDET C
pp 273-278 of Thermal Spray Science & Technology, Eds C.C. Berndt and S. Sampath, Pub. ASM International, Materials Park, OH-USA, 1995, 774+ pages (Houston)
Stereological analysis of thermally sprayed deposits
MONTAVON G., CODDET C., LEIGH S.H., SAMPATH S., HERMAN H., BERNDT C.C.
pp 279-283 of Thermal Spray Science & Technology, Eds C.C. Berndt and S. Sampath, Pub. ASM International, Materials Park, OH-USA, 1995, 774+ pages (Houston)
3 D profilometries of vacuum plasma sprayed nickel based alloy splats using scanning mechanical microscopy
MONTAVON G., CODDET C.
pp 285-289 of Thermal Spray Science & Technology, Eds C.C. Berndt and S. Sampath, Pub. ASM International, Materials Park, OH-USA, 1995, 774+ pages (Houston)
On the spray forming of the Ti-6Al-4V alloy
MONTAVON G., CLAUDON A., CODDET C., MANESSE D., HUCHIN J.P., GARCIA J.C., PELLERIN F., CORNU D., DE MONICAULT J.M.
8th world Conference on Titanium, 22-26 octobre 1995, Birmingham, United Kingdom
Vacuum plasma spray forming af astroloy : An investigation of processing parameters
MONTAVON G., CODDET C., SAMPATH S., HERMAN H., BERNDT C.C.
pp 469-475 of Thermal Spray Industrial Applications, Ed C.C. Berndt and S. Sampath, Pub. ASM International, Materials Park, OH-USA, 1994, + 794 pages (Boston)
The plasma spray forming of astroloy
MONTAVON G., ROUSSEL E., CODDET C., CORNU D., DE MONICAULT J.M., FAUVET E., HUCHIN J.P., GARCIA J.C., PELLERIN F.
pp 485-489 of Thermal Spray Industrial Applications, Ed C.C. Berndt and S. Sampath, Pub. ASM International, Materials Park, OH-USA, 1994, + 794 pages (Boston)
Tribological properties of cermets coatings deposited using thermal spraying techniques
LIAO H., CODDET C., OBERST F.
pp 371-378, 3rd european congress on thermal plasma processes, 19-21 septembre 1994, Aachen, Germany
Caractérisation physico-chimique de préimprégnés et composites TiAl/SiC-SM 1240 elaborés par projection plasma
DJANARTHANY S., VIALA J.C., CHANTERANNE J., ROCHE J.F., CODDET C.
pp 1095-1104, 9e journées nationales sur les composites, 22-24 novembre 1994
Publications déposées en 1988 – 1992
Blistering mechanisms of thermally sprayed zinc and zinc-based coatings in seawater
KWEON Y.G., CODDET C.
Corrosion, 1992, Vol. 48, N° 8, pp 660-665
Contribution à l’étude des caractéristiques magnétiques des alliages Co-Ni et Co-Ni-P obtenus par voie electrolytique
FENINECHE N., EL KEDIM O., CODDET C.
Journal de Physique IV, Colloque C3, supplement au journal de physique III, 1992, Vol. 2, pp 107-111
Magnetic properties study of textured Co-Ni deposits
FENINECHE N., EL KEDIM O., CODDET C.
Textures and Microstructures, 1991, Vol. 14-18, pp 163-168
The effect of pulse parameters on the electrodeposition of Co-Ni alloys
FENINECHE N., EL KEDIM O., CODDET C.
Surface and Coatings Technology, 1991, Vol. 41, pp 205-209
Effect of electrodepostion parameters on the microstructure and mechanical properties of Co-Ni alloys
FENINECHE N.E., CODDET C., SAIDA A.
Surface and coatings technology, 1990, Vol. 41, pp 75-81
Autres publications et Actes de colloques
Statistical calculations on the correlation between spraying parameters and porosity of TBC
IZQUIERDO P., SOEHINGEN J., ADAM P., COSACK T.
pp 45-54, 2nd Plasma-Technik-Symposium Lucerne/Switzerland – 5 au 7 juin 1991 – volume 2
Study of the effecf of a superimposed transferred arc during plasma spraying of MCrAlY powders
MEUNIER O., CODDET C., HUBER P.
TS 90 – Thermal spraying conférence – essen les 29 et 31 août1990 – pp 19-22
Plasma spraying of protective coatings : role of thermal exchanges during spraying on the microstructure of the deposit
WANG U., MEUNIER O., CODDET C.
International Symposium High Temperature Corrosion Protection, 26-30 juin 1990 – Shenyang – CHINA
Evaluation of the adherence of atmospheric plasma sprayed coatings by the use of mechanical tests, and correlation with coatings microstructure
CHOULIER D., CODDET C.
12th International Thermal Spraying Conference, London, 4-9 June, 1989. Paper 45.
Influence of spraying parameters on the adherence of atmospheric plasma sprayed coatings
CHOULIER D., FLUZIN P., CODDET C.
ASM international Metals Park, Ohio 44073 – Heat teatment and surface engineering, Chicago, Illinois, 28-30 septembre 1988
Characterization of the substrate-coating interface toughness by an interfacial indentation test. Influence of different parameters on the bond strength
CHOULIER D., FLUZIN P., THAUVIN G., CODDET C.
1st Plasma Technik Symposium, Lucerne, 18-20 May, 1988, Vol.2 pp 293-305